|
Software Update Module / Add-on Software |
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Confirm your software version using the following steps:
[Project Manager] --> [Help] --> [About...]
|
File
Name |
GLC2300Additional.exe |
Series |
GLC2300L/GLC2300T/GLC2600T |
Software |
GP-PRO/PB
III for Windows Ver. 5.05
Pro-Control Editor Ver. 3.0 |
Size |
16,364KB |
Update
Items |
Add-on
programs to enable the use of the GLC2300
Series and GLC2600T units with the
GP-PRO/PB III for Windows Ver. 5.05
and Pro-Control Editor Ver. 3.0 programs. |
|
|
|
Opening
the file (This is a self-extracting file.) |
1. |
Click
on the file "ProW505-Add.exe" in the box above to download
data to the desired folder. |
2. |
After
the download is finished, double-click on
the "ProW505-Add.exe" file
to open it. |
3. |
Select
the desired language in the "Choose Setup Language" screen
and click [OK]. |
4. |
Follow the instructions
given by the installation program. |
Last Updated : December.10,2001 |
|