Contact us
Back to Top
 Software Trial Version
 > GP-Pro EX Ver. 3.5 Disk1 Download

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Caution :

- Be sure to download the installer file.
After downloading, start installation using the file on the computer to be installed.
If a network drive is used, installation cannot be performed normally.

- This file is very large. Downloading over a slow connection will require a long time.
【Reference】 In the case of online speed 100Mbps
Download: About 30 to 60 minutes
Installation: About 10 minutes

If you have any questions about our product, please contact nearest office.
--> International Sales Offices

- This trial software does not allow transfer of the screen data which you have created to target machines (except GP4100 series).
- DVD-R/DVD-RW is needed to burn the installer file.
For further information (Limitations or Cautions) about GP-Pro EX Ver. 3.5 Limited Edition (Trial Version), please see Readme_E.txt.

GP-Pro EX Ver. 3.5 Disk1 Download
File Name / File Size GPPROEX350000D1.exe: 736,240KB
File Description [Disk1 Description]
- GP-Pro EX Ver. 3.5
- Transfer Tool / Version Reverter

* Click here to download the file of Disk2.

[Disk2 Description]
- WinGP
- Movie Converter
- GP-Viewer EX
- Camera-Viewer EX
- Data Copy Tool
- GP Remote Printer Server
- EZ Fingerprint Recognition Setting Tool
- EZ Fingerprint Recognition Unit Driver
- Pass Through
- Pro-face Converter

* For more information about each tool, please refer to follows.
Product Page "GP-Pro EX"
Readme Please see Readme_E.txt about new feature, limitations, and fixed defects.

Installation (These files are self-extracting.)
*Prior to installation, be sure to close all software applications that are running.
[Installation of GP-Pro EX Ver. 3.5 Limited Edition (Trial Version)]
1. Click the above file "GPPROEX350000D1.exe" to download the file to the desired folder.
2. Double-click the downloaded file "GPPROEX350000D1.exe".
3. The following screen will be displayed, click the checkbox of "Not Input Serial / Key Code (Limited Edition)", and then click "Next". (If you enter your serial / key code, the software will be fully functioned.)

4. Follow the instructions given.

[Installation of Pro-face Converter]

To install Pro-face Converter, please follow the procedure below.
Failure to follow the procedure will lead to an installation failure and display the message, "Please insert CD of Pro EX Editor in the CD drive."

  1. Double-click the GPPROEX350000D1.exe file.
  2. Open the GPPROEX350000D1 folder that is created in the same location as the EXE file.
  3. Copy the file, ABS.sys, from the folder to the root folder (C:\).
  4. Double-click ProEX_Setup.exe to start the installer, and select Pro-face Converter.
  5. After installation, delete the ABS.sys file.

Please click here to upgrade GP-Pro EX Limited Edition to a functional version.


Posted: Sep. 30, 2013
Return to Top <-Back
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.