 |
| PS
Series |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
-- Note --
Since the installers are different between PS-400G and PS-600G, please be careful to download and install the appropriate model for your machine.
|
| Unit Name |
PS-400G Series |
PS-600G Series |
| File Name |
Backlight_110_PS400G.CAB |
Backlight_110_PS600G.CAB |
| File Size |
14KB |
14KB |
| Description |
New Backlight.dll back light Driver for PS Series Type-G units. |
| Update Description |
| 1. This module corrects the following: |
| - |
In low temperature and darkness, when the backlight was turned on after being off for a long time, the backlight could be incorrectly detected as burned-out. |
| - |
When API to turn on the backlight was executed, API response was interrupted until burned-out backlight monitoring starts. |
|
If a backlight properties are set while the backlight is "off" after the API to turn off the backlight has been executed, burned-out backlight could be incorrectly detected. |
| - |
When API was used to turn on the backlight using the automatic light-off function screen saver input devices, such as keyboard, mouse, and touchpanel, became unuseable. |
| - |
Burned-out backlight could be overlooked. |
|
|
|
Installation (This file is self-extracting.) |
| 1. |
Click "Backlight_110_PS400G.cab" if you use PL-5900 Series, or click "Backlight_110_PS600G.cab" if you use PS-600G Series to download to your desired folder. |
| 2. |
Copy "Backlight_110_PS400G.cab" or "Backlight_110_PS600G.cab" - here in after written as a "CAB file" - to the CF Card, and insert the CF Card in your PS Series Type G unit. |
| 3. |
Start up Windows Explorer, copy CAB file from the CF Card's [Storage Card1] folder and paste it to the PS unit's [Temp] folder. |
| 4. |
Double-click CAB file. |
| 5. |
In the installing dialog box, confirm that the path "\Windows\" is selected as the installation destination folder and click "OK". |
| 6. |
When "Confirm File Replace" dialog box appears, click "Yes". |
| 7. |
Select "Backup" in the Control panel, and save the PS unit's current environment settings to the CF card. |
| 8. |
Restart the PS-G unit. |
-- To the customers using the "Netscape" browser --
If you use the Netscape browser, select "Save Link Target As..." in the menu displayed by clicking the right mouse button, and then download a file to the desired folder. |
|
| Last Updated: July.12.2004 |
|
