Products
Download
Contact us
Back to Top

PS Series

> PS4000 Series >MTCX Firmware (BIOS Update)

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download
Title MTCX Firmware (BIOS Update)
File Name / Size BoxPC_PanelPC-MTCX_Update_V113.exe / 392KB
Version MTCX PX32: Ver. 1.07
MTCX FPGA: Ver. 1.11
Supported OS
  • Windows® XP Professional
  • Windows® 7 Ultimate
  • Windows® Embedded Standard 2009
  • Windows® Embedded Standard 7
Description Update module for MTCX firmware
Updated Contents The following issue was corrected:
  • Despite fan threshold is not exceeded, fan error occurs infrequently on System Monitor.
Applicable Version
  • PS-4800 Series (Core2Duo model / Atom N270 model *1):
    MTCX firmware version *2: MTCX PX32: Ver. 1.06 and MTCX FPGA: Ver. 1.10
  • PS-4700 Series (Core2Duo model / Atom N270 model *1):
    MTCX firmware version *2: MTCX PX32: Ver. 1.06 and MTCX FPGA: Ver. 1.10
  • PS4000B Series (Core2Duo model / Atom N270 model *1):
    MTCX firmware version *2: MTCX PX32: Ver. 1.06 and MTCX FPGA: Ver. 1.10

*1 About AtomN270 model
    In the case of that fan kit (optional) is installed.

*2 How to check the MTCX firmware version
  1. After power on, press [DEL key], and open BIOS Setup.
  2. Advanced -> Baseboard / Panel Features
    Confirm the versions of MTCX PX32 and MTCX FPGA

Installation (This file is self-extracting.)

  1. Download update module of MTCX firmware.
  2. After downloading, double-click on the downloaded exe file.
  3. The message “Do you want to update now?” shows on the window, and then click “yes”.
  4. DOS command prompt is activated, and installation starts automatically.
  5. After installation, the message “Press any key to continue..” is appeared on DOS command Prompt.
  6. After finishing the installation, once power off the unit manually, and the power on the unit.
    ( It is not updated by restart.)
* When updated module is installed on Windows 7, log on as an administrator rights.
* After updated, it is not able to back to the original version.

Update History:

[Ver. 1.13] (Dec. 20, 2013)

New

Posted: Dec. 20, 2013

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.