Contact us
Back to Top
 Driver Download
 > PLCs > HITACHI S10V Ethernet Protocol

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Title HITACHI S10V Ethernet Protocol
File Name S10V_ETH.exe
File Size 1,299KB
Supported Software GP-PRO/PB III for Windows Ver. 2.1 or later
Pro-Server with Pro-Studio Ver. 1.0 or later
Supported PLCs - S10V Series
Supported Units - GP Series
GP77R Series, GP2000 Series
- GLC Series
GLC2000 Series
- Factory Gateway
PLC Connection Manual For details, please read the following PDF:
Hitachi Corporation S10V Series (Ethernet) (PDF:108KB)

Installation (The downloaded file is self-extracting.)
1. Prior to installing the driver, close all your personal computer applications, including any resident program such as virus detection program, etc.
2. Click on the above file name to download the data to desired folder.
3. After the download to your PC is finished, double-click on the file's icon to start the installer program.
4. After the installer starts, follow the instructions given on each screen.
The installer's default setup folder is for installing the driver to GP-PRO/PB III for Windows.
5. After installation, when using GP-PRO/PB III for Windows Ver. 5.x, LT Editor or Pro-Server with Pro-Studio, select [HITACHI S10V SERIES(ETHER)] for the "PLC Type".
When using GP-PRO/PB III for Windows Ver. 6.0 or later, click on the Device/PLC area's [other] selection and select [HITACHI S10V SERIES(ETHER)].

* When using the driver, be sure to refer to the PLC Connection Manual PDF (Shown above). Also, for general information regarding PLC connection and documentation conventions please refer to your own Device/PLC Connection Manual.

Last Updated: June.21.2004
| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.