 |
| PRotocol
Download |
|
|
| > PLCs > Allen
Bradley SLC500 Series, Mitsubishi Melsec Q Series(CPU) Protocol
Update Modules |
|
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
| File
Name |
DriverUpdateKit1.exe |
| File
Size |
1,345KB |
| Protocol |
Series |
Driver
(Version) |
Models |
Allen
Bradley
SLC500 Series |
SLC500.EPN
(Ver. 1.45) |
GP77R
Series
GP2000 Series |
SLC500.HPN
(Ver. 1.45) |
GP377
Series |
SLC500.APN
(Ver. 1.45) |
GP70
Series |
Mitsubishi
Melsec Q Series (CPU) |
MEL_QP.EPN
(Ver. 1.44) |
GP77R
Series
GP2000 Series |
MEL_QP.HPN
(Ver. 1.44) |
GP377
Series |
MEL_QP.APN
(Ver. 3.43) |
GP70
Series |
Update
Description |
-
Allen Bradley SLC500 Series
|
|
Changes
on Ver. 1.45 (GP77R Series/GP2000
Series/GP377 Series), Ver. 3.45
(GP70 Series) |
| 1. |
When
writing data to the PLC from GP/GLC,
200ms delay time is reduced to
20ms. |
|
-
Mitsubishi Melsec Q Series (CPU)
|
|
Changes
on Ver. 1.44 (GP77R Series/GP2000
Series/GP377 Series), Ver. 3.43
(GP70 Series) |
| 1. |
A
communication error with PLC COM.ERROR
(02:FC) may occur. |
| 2. |
When
using the built-in 2-Port function
between and GP with a PC with 'GX
Developer Ver. 6.0 or Ver. 7.0',
errors may occur. |
|
|
Installation (The downloaded file is self-extracting.) |
| 1. |
Prior
To Installation
- Be sure to close all application's on the PC. |
| 2. |
Click
on the above file name to download the
data to a folder you wish to store. |
| 3. |
After
the download to your PC finishes, double-click
on the file's icon to start the installer
program. After the installer starts, simply
follow the instructions given on each screen.
This program installs the new GP/GLC driver
files into the GP-PRO/PB III for Windows "PROTOCOL" folder. |
| 4. |
To
send new driver data to the GP/GLC:
Use the GP-PRO/PB III "Transfer" area's "Force Setup" feature
to download the new driver to your GP/GLC. "Force Setup" is located
in the Transfer area's [Setup] menu. Click on the "Force Setup" checkbox
to select it. |
| 5. |
Driver
version confirmation:
You can check that the new driver has been
successfully downloaded to your GP/GLC
via the OFFLINE. Also, After sending the
new driver data, be sure
to deselect the Force Setup feature and reselect the standard "Auto
Setup" setting. |
|
Attention:
While viewing the property of the downloaded
update module, and selecting the "Version
Tab", the follwing error will be displayed:
"This program has performed an illegal operation and will be shut down."
We have confirmed this problem. Please do not view the "Version Tab" of
this updated module.
This problem will not effect the updated module which will correctly install
the updated files to your computer. |
| Last Updated: September.11.2001 |
|
