 |
| PL
Series |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
| - |
To use this update, a previous
version of the system monitor must be installed. |
| - |
This file is only for
PL-5910 series.
Please do not use it for other models. |
| - |
If the System Monitor has
already been registered in the start-up
menu, an error message of a double start
is
displayed
at OS start. In that case, please delete
the System Monitor registered in start-up
menu. |
|
| File
Name |
PL5910_SysmonUpdate20051206.exe |
| File
Size |
1,916KB |
| Unit
Name |
PL-5910 series |
| OS |
Windows NT®4.0(
Service Pack6 or later ), Windows®2000 |
| Description |
Contains the RAS/System Monitor
update. |
| Update
Description |
| 1. |
The following
issues were corrected: |
| |
| - |
Increases in memory usage of the System Monitor increases. |
| - |
The processing of System Monitor stopped while displaying a message of remote RAS communication error. |
| - |
When there were two or more network devices, it becomes Auto even if the first device was selected by setting of remote RAS. |
| - |
When starting System Monitor Propenty again, error action of WDT could be set even if Reset was enabled. |
|
| 2. |
Restrictions: |
| |
| - |
Administrator Authentication is required for executing SMART Monitoring. |
| - |
Only hard disks
connected with IDE can be
monitored by SMART.
Hard disks connected with USB or
SCSI cannot be monitored. |
| - |
CF cards do not support SMART and therefore the status of CF cards cannot be monitored. |
| - |
Proper function of SMART Monitoring can not be guaranteed with a hard disk from any manufacturer other than Digital. |
|
| |
SMART Monitoring
Supported HDD
| Model |
Revision |
| PL-HD220 |
Rev.C or later |
|
| |
*There
are no restrictions about revisions
for the customers who use the PL-5910
Series pre-installed HDD
(PL-HD5910-WNT-BLD for WindowsNT, PL-HD5910-W2K-BLD
for Windows 2000).
SMART function can only be used with
hardware and software that have no
revisions. |
| 3. |
The version
of this update PL_SMON.EXE 1.01→
1.02. |
| |
If
the version of PL_SMON.EXE is 1.02
or higher, it is not necessary to
execute
this update.
The file exists in the C:\Proface\Sysmon folder.
Version information can be checked by checking to the version in file properties. |
|
|
|
About RAS/System Monitor
For details, please read the following PDF:Manual
PDF (3,030KB) |
|
Installation (This file is self-extracting.) |
| 1. |
Please click the above-mentioned
file "PL5910_SysmonUpdate20051206.exe" and
download to an appropriate folder. |
| |
| * |
If the update module cannot
be downloaded to the PL-5910 unit, please
download it temporarily to the another
PC, and copy the module to the PL-5910
unit
where you want to install the module. |
|
| 2. |
Please exit System Monitor
if it is running. |
| 3. |
Please double-click the downloaded
file "PL5910_SysmonUpdate20051206.exe". |
| 4. |
Update starts automatically. |
| 5. |
Please reboot the system after
the installation. |
|
Update History |
[January 26,
2006]
|
| 1. |
The following
issues were corrected: |
| |
| - |
Increases in memory usage of the System Monitor increases. |
| - |
The processing of System Monitor stopped while displaying a message of remote RAS communication error. |
| - |
When there were two or more network devices, it becomes Auto even if the first device was selected by setting of remote RAS. |
| - |
When starting System Monitor Propenty again, error action of WDT could be set even if Reset was enabled. |
|
| 2. |
With this
update, applications with the following
version are provided. |
| |
| - |
PL_SMON.EXE
1.01→ 1.02. |
|
|
|
|
| [October
31, 2005] |
| 1. |
The following
settings were added: |
| |
| - |
Hard
Disk is monitored by Hard Disk
SMART function. |
| - |
An
error pop up message displayed
repeatedly. |
| - |
The
text of the error pop up message
was changed to red. |
| - |
System
Monitor is set to start automatically
when OS starts. |
|
| 2. |
With this
update, applications with the following
version are provided. |
| |
| - |
PL_SMON.EXE
1.00→ 1.01. |
|
|
|
|
| Last Updated: January
26, 2006 |
|
