>PL3000 Series >Battery Unit Driver for PL3000 Series
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Download
Note:
Install this driver in the following case only:
Customers, who have purchased a PL3000 Series with the built-in battery unit, use the applicable model shown in the table below.
Please do not install it in the device which does not incorporate a dedicated battery unit option.
PL3KBatteryUnit_09042008.exe:
This is a driver for PL3000 Series with the built-in battery unit.
By installing this driver, the battery monitoring function is added to the System Monitor. Therefore, batch monitoring can be performed and an additional feature performs shut down operation when a power failure occurs.
Sysmon_Driver_UpdateV107.exe:
Battery unit erroneous detection measures is added.
Updated Contents
PL3KBatteryUnit_09042008.exe (Oct. 17, 2008)
The following issue was corrected:
The service startup of the battery unit could not be performed normally.
Sysmon_Driver_UpdateV107.exe (May. 29. 2015)
The following issue was corrected:
The battery unit disconnect error may be mistakenly detected in some case.
Applicable Model
Following Models with the dedicated battery unit option are applicable for the update:
<PL3KBatteryUnit_09042008.exe (Ver. 1.01)>
HD with a preinstalled OS
Model
Software Revision
Volume Label
APL3000-HD60-WXP-CD-BLD
[B]
APL3KCDXPJ3
APL3000-HD60-WXP-CM-BLD
[B]
APL3KCMXPJ3
HD without the preinstalled OS
Model
Added Option
APL3*00-*-*-*-*-B*
Dedicated battery unit (without HD)
APL3*00-*-*-*-*-*60*-B*
Dedicated battery unit
+ HD60GB (No OS)
APL3*00-*-*-*-*-*250*-B*
Dedicated battery unit
+ HD250GB (No OS)
* stands for an arbitrary character designated at the time of purchase.
<Sysmon_Driver_UpdateV107.exe (Ver. 1.07)>
HD without the preinstalled OS
Model
Added Option
APL*-*-*-4P-*-*-*-B*
Dedicated battery unit
* stands for an arbitrary character designated at the time of purchase.
Installation (This file is self-extracting.)
- PL3KBatteryUnit_09042008.exe (Ver. 1.01)
Click "PL3KBatteryUnit_09042008.exe" and download it to the appropriate folder.
Double-click the downloaded file. (Any extraction destination will do.)
When [OK] is clicked, the file is extracted. (If the same name file has already existed, it is overwritten.)
Double-click the "PL3KBatteryUnit_09042008.exe" file that is extracted in Step 2 above to start the install.
Complete the install by following the messages on the window.
Restart the panel computer.
- Sysmon_Driver_UpdateV107.exe (Ver. 1.07)
If you installed "PL3KBatteryUnit_09042008.exe" or you have already been using Battery Unit, please install "Sysmon_Driver_UpdateV107.exe".
Click "Sysmon_Driver_UpdateV170.exe" and download it to the appropriate folder.
Double-click the downloaded file to start the install.
Complete the install by following the messages on the window.
Panel computer will restart automatically.
Update History:
PL3KBatteryUnit_09042008.exe:
[Ver. 1.01] (Oct. 17, 2008)
The following issue was corrected:
The service startup of the battery unit could not be performed normally.
Sysmon_Driver_UpdateV107.exe:
[Ver. 1.07] (May 29, 2015)
The following issue was corrected:
The battery unit disconnect error may be mistakenly detected in some case.
Last Updated : May 29, 2015
Posted : Aug. 21, 2008
