Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Installing this driver enables communication with the RGB Input Unit via the USB cable.
This module is for the GP3000 Series RGB Input Unit (GP3000-RGB201).
System Environment
Windows® 2000
Windows® XP
Windows® Vista
Others
The USB driver runs as the virtual COM port.
Confirm that "GP3000-RGB20x" is added to "Port (COM and LPT)" of Device Manager.
When installing the mouse emulation software, select the port number for which "GP3000-RGB20x" is allocated.
Installation (This file is self-extracting.)
Click on the link "RGBVCP_540.exe" in the box above to download the file to the desired folder.
After the download is finished, double-click on the "RGBVCP_540.exe" file to decompress it.
Installer starts up automatically. Follow the steps instructed by the installer.
* If the installer does not start up normally, double-click "ProgramFiles\Pro-face\RGBVCP_540\DriverInstaller.exe" for install.
After the install is finished, connect your PC with the RGB Input Unit, using the USB cable. The aforementioned driver is automatically set up.
* In some environments, a message as shown below may be displayed. Even if the message is displayed, there are no problems and please continue the install.
- "Digital signature not found" (Windows® 2000)
- "...has not passed Windows Logo testing to verify its compatibility with Windows XP." (Windows® XP)
- "Windows can't verify the publisher of this driver software" (Windows® Vista)
Mouse emulation software.
Touch operation enabled by installing this software
System Environment
Windows® 2000
Windows® XP
Windows® Vista
Others
Only serial communication is available for communication with a touch panel.
Before using this software, disable the system standby setting.
If the standby setting is cancelled under the condition that PC's system standby setting is enabled, the USB driver of the mouse emulation software does not recognize the status and, as a result, the mouse emulation function does not work normally.
Installation (This file is self-extracting.)
Click on the link "RGB2CH_40106R.exe" in the box above to download the file to the desired folder.
After the download is finished, double-click on the "RGB2CH_40106R.exe" file to decompress it.
Double click "Setup.exe" in the folder created after decompression for installation.
In installing, [Selecting the controller] is displayed for setting communication method with touch panel.
For communication between the touch panel and PC, select "Digital, TSC-1310D Series Serial".
* When "Digital, TSC-1310D Series USB" is selected, the software does not work normally.
