Products
Download
Contact us
Back to Top

FP Series

>FP5000 Series >FP5000 Touch Panel Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

  • When this driver is installed for Windows® Embedded of Pro-face products, please be sure that the Write Filter is disabled. We recommend that you re-enable the Write Filter after installation.
Title FP5000 Touch Panel Driver
File Name TouchPanelDriver.zip
File Size 1,983KB
Version 1.0.1.0
Supported OS
  • Windows® XP 32-bit
  • Windows® Embedded Standard 2009 for Pro-face products *1

*1 For supported models, contact your local distributor.
Description This driver sets cursor movement on the target display for touch operations.

How to install

  1. Connect this product to the host with a DVI-D cable and USB cable.
  2. Turn on this product and the host, and start Windows®.
  3. Touch the screen and confirm that the curser moves.
  4. Download the drivers onto the host.
  5. From the folder containing the downloaded drivers, open Drivers → TouchPanelDriver → wxp.
  6. Run Setup.bat, and follow the on-screen instructions to install the drivers. If the following dialog box appears during installation, select Continue Anyway.
  7. Click Finish to complete the installation.

Update History:

[Ver. 1.0.1.0] (Mar. 25, 2016)

The issue of touch operation was fixed when the angle of the display is 90 degrees or 270 degrees.

[Ver. 1.0.0.0] (Nov. 18, 2014)

New

Last Updated : Mar. 25, 2016
Posted : Nov. 18, 2014

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.