
GP-Pro EX:Important Notification for Users of OMRON C/CV/α series
Posted: 2009, February 10
Thank you very much for your continuous use of Pro-face products.
We have confirmed that the following symptom has been seen in GP-Pro EX.
The symptom for this problem are indicated below.
We sincerely apologize for any inconvenience this may cause you.
Symptom description
When the PLC of OMRON C/CV/α series is in operation in "Program Mode" and GP-Pro EX is set to permit "Change to Monitor Mode", the PLC mode is changed to the "Monitor Mode" when you turn on the power with a display unit connected
(We confirmed that this symptom does not occur in other PLC products.)
Applicable version
- Before GP-Pro EX Ver.2.22.000
- Before OMRON C/CV series Hot Link driver V1.11.03
Measures
This symptom can be worked around by updating the GP-Pro EX Hot Link driver to the latest version (V1.11.04) and then transferring to a main unit, executing the following.
Obtain Update module from the download site in our homepage *1and update GP-Pro EX
- Membership registration (free) of our support site "Otasuke Pro!" is needed.
Inquiry
If you have any inquiries, please contact our sales office in your region.
For contact information, please refer to the "Inquiry" page.