Parts Identification
-
Status LED
-
Front USB cover
-
USB 2.0 (Type A)*1
-
USB 2.0 (micro-B) (this interface is unavailable.)
-
VESA mount screw hole*2
-
DVI-D input interface
-
USB 2.0 (Type B)
-
Power connector
*1 By default, the front USB is disabled. To enable, set in the Launcher.
*2 This product can be mounted to commercially available
monitor arms that comply with the VESA standard (75 x 75 mm). Use four M4 screws (screw
length: 10 mm [0.4
in]). The necessary torque is 0.7 to 0.8 N•m (6.2 to 7.1 lb-in).
VESA mounting is not UL certified.