| Careful! |
| When linking to the PDF file from Internet Explorer using Windows XP Service Pack 2 or later, a message displays on the Information Bar.To open the PDF manual, click the message displayed on the Information Bar, and then select [Download File]. |
|
 |
|
| Manual Symbols and Terminology |
| |
| Safety Symbols and Terms |
|
| This manual uses the following symbols and terms to identify important information related to the correct and safe operation of Pro-Server EX. The symbols and the descriptions are as follows. |
|
|
|
|
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
|
|
WARNING indicates a potentially hazardous situation which, if not avoided, can result in death or serious injury. |
|
|
|
CAUTION indicates a potentially hazardous situation which, if not avoided, can result in minor or moderate injury. |
|
|
|
This display is used to address practices not related to physical injury. |
|
| |
| General Information Symbols and Terms |
|
| This manual uses the following symbols and terms for general information. |
|
| Display |
Description |
 |
States precautions and restrictions that must be followed. |
 |
Provides hints on correct product use, or supplementary information. |
 |
Indicates an item with an explanatory footnote. |
 |
Indicates an item's related information. |
 |
Indicates an operation procedure.Follow the numbered steps. |
|
| |
| Terminology |
|
| This manual uses the following terms and acronyms in its descriptions. |
|
| Display |
Description |
| GP |
Indicates Programable Display(GP4000 Series, GP3000 Series, GP2000 Series, LT3000 Series)/WinGP/Graphic Logic Controller(GLC)/Factory Gateway |
| GP Series |
Indicates Programable Display(GP2000 Series)/Graphic Logic Controller(GLC)/Factory Gateway |
| GP3000 Series |
Indicates Programable Display(GP3000 Series) |
| GP4000 Series |
Indicates Programable Display(GP4000 Series) |
| WinGP |
Indicates IPC Series(PS Series, PL Series, and PC/AT compatible machines) |
| LT3000 |
Indicates Programable Display(LT3000 Series) |
| PLC |
Indicates Programable Logic Controllers |
| OS |
Indicates Operation System |
| PC |
Indicates Personal Computer |
|
| |
| About substitution |
|
This manual describes how to use and set up the GP3000 series. If you use models other than the GP3000 series, references to "display unit" and "GP" apply to the model you use. For models that support an SD card, references to "CF"/"CF Card" apply to "SD"/"SD Card".
Make sure to check Supported Features in this manual, because available functions vary depending on the model.
Refer to the following sections for the system configuration used to explain the operations and features.
|
|
| |
| Global Code |
|
A global code is assigned to every Pro-face product as a universal model number.
For more information on product models and their matching global codes, please refer to the following URL.
URL:http://www.pro-face.com/product/globalcode.html |
|
| |
|
|
