Please refer to the Settings Guide for details.
19.12 Graph Part Settings Guide
For details about placing parts or setting addresses, shapes, or colors, please refer to the "Part Editing Procedure".
8.7.1 Editing Parts
Displays word address (D100) data on a Bar Graph.
From the [Parts (P)] menu, select [Graph (G)] or click . Place the Graph on the screen.
Double-click the new Graph. The following dialog box appears.
In [Monitor Word Address], set the address (D100) you want to display. Then set the [Data Type] and [Bit Length].
In the [Specify Source Range] drop-down list, select [Constant], and specify the range of data that is stored in that address (for example, minimum value 0, maximum value 500). If you are storing negative values, set [Sign +/-] to [2's Complement] or [MSB Sign].
In the [Graph Shape] drop-down list, select [Bar Graph].
You can also select [Circle Graph], [Semicircle Graph], and [Tank Graph].
In [Select Shape], select the Graph shape.
On the [Color] tab, set the [Display Color].
Set the Graph's other colors (pattern color, border color) if necessary.
On the [Scale] tab, set the scale's display settings, designate the scale colors, and click [OK].
For graph parts with a scale, Scale Label for the major scale can be automatically placed using a text part.
Right-click the graph part with a scale and click [Scale Label Placement]. The [Text] dialog box appears. Set up each item and click [OK].