-
Please refer to the Settings Guide for details.
14.11.1 Numeric Display -
For details on how to draw parts, and defining the address, shape, and color, refer to the following.
8.7.1 Editing Parts
Please refer to the Settings Guide for details.
14.11.1 Numeric Display
For details on how to draw parts, and defining the address, shape, and color, refer to the following.
8.7.1 Editing Parts
From the [Parts (P)] menu, point to [Data Display (D)] and select [Numeric Display (N)], or click the 
icon, and place it on the screen.
Double-click the placed Data Display. The Data Display dialog box appears.
Select a part shape as necessary. Deselect [No Shape], and select a shape from [Select Shape].
In [Monitor Word Address], set up the address to store the displayed numeric value.
In the [Data Type] drop-down list, select the type of data to display (for example, "16 Bit Dec").
Select the [Allow Input] check box. The [Data Entry] tab is displayed.
Click the [Data Entry] tab and select the [Enable Popup Keypad] check box.
On the [Data Entry] tab, click [Extended]. The following dialog box appears.
From the [Interlock Feature] area, select the [Enable Address] check box and in the [Address] field specify the bit address (M100) that will enable touch inputs.
Use the [Touch Enable Condition] options to set up a condition that enables touch inputs. (For example, select "Enable When Bit is Off" to enable touch operations when the bit is off.)
Set the font and/or color in the [Color/Alarm] and [Display] tabs as necessary and click [OK].