
Notification to our valued customers who use GP-Pro EX Ver. 3.00 with GP-4105, GP-4106 and GP-4107
Posted: 2011, Nov. 1
Thank you very much for your continuous use of Pro-face products.
We have confirmed that the following symptom occurs in some models of GP-Pro EX.
The symptom for this problem are indicated below.
We sincerely apologize for any inconvenience this may cause you.
Symptom
When GP-Pro EX Ver. 3.00 is used with GP-4105/GP-4106/GP-4107:
It seems that MICREX-F series SIO driver (V1.11.02) manufactured by Fuji Electric Co.,Ltd. can be selected on the screen editor, but the driver cannot be actually used because it is not supported by GP-4105, GP-4106 and GP-4107. If the created project data is transferred, therefore, an error occurs on the transfer tool.
It seems that MICREX-F series SIO driver (V1.11.02) manufactured by Fuji Electric Co.,Ltd. can be selected on the screen editor, but the driver cannot be actually used because it is not supported by GP-4105, GP-4106 and GP-4107. If the created project data is transferred, therefore, an error occurs on the transfer tool.
Applicable product
Screen Editor Software "GP-Pro EX":
Driver:
GP unit :
Product model: | PFXEXEDV30 |
---|---|
Applicable version: | GP-Pro EX Ver. 3.00.000 (This issue does not occur in the earlier versions than Ver.3.00.000.) |
How to check the version: | [Help(H)] → [About this program(A)] |
Driver:
Driver name: | Fuji Electric Co.,Ltd. MICREX-F Series SIO |
---|---|
Applicable version: | Ver. 1.11.02 |
GP unit :
Series: | GP4100 Series |
---|---|
Product name: | GP-4105 |
GP-4106 | |
GP-4107 |
Inquiry
If you have any inquiries, please contact our sales office in your region.
For contact information, please refer to the "Inquiry" page.