Notification to customers who use In-Sight Vision Systems Driver
Last Updated: 2011, August 9
Posted: 2011, July 29
Thank you very much for your continuous use of Pro-face products.
We have confirmed that there is an incorrect description in the “In-Sight Vision Systems Driver” connection manual.
We report about the error below.
We sincerely apologize for any inconvenience this may cause you.
Applicable product
Screen Editor Software "GP-Pro EX":
PLC Driver:
Cognex Corporation In-Sight Vision Systems Driver Ver. 1.10.00
| Product model: | EXEDV27 |
|---|---|
| How to check the version: | [Help(H)] → [About this program(A)] |
PLC Driver:
Cognex Corporation In-Sight Vision Systems Driver Ver. 1.10.00
Correction
1. Incorrect description on models which can be connected to the“COGNEX In-Sight vision systems
(In-Sight Vision Systems Driver connection manual P3)
Incorrect
NOTE
- This driver does not support GP-4100 series.
Correct
NOTE
- This driver does not support LT3000 series, ST3000 series, GP4100 series, GP3200 series, GP3000 series
Multi-media class, GP3000 series Rev.4 or less.
Incorrect
NOTE
- This driver does not support GP-4100 series.
Correct
NOTE
- This driver does not support LT3000 series, ST3000 series, GP4100 series, GP3200 series, GP3000 series
Multi-media class, GP3000 series Rev.4 or less.
2. Incorrect notes on the connection to the “COGNEX In-Sight vision systems”
(In-Sight Vision Systems Driver connection manual P3)
Incorrect
MEMO
- Two or more displays cannot be connected to one external device.
Correct
MEMO
- Two or more displays cannot be connected to one external device.
- The camera image size can be used up to the size of 640*480 or less.
Incorrect
MEMO
- Two or more displays cannot be connected to one external device.
Correct
MEMO
- Two or more displays cannot be connected to one external device.
- The camera image size can be used up to the size of 640*480 or less.
3. Notes on supported devices is omitted.
(In-Sight Vision Systems Driver connection manual P14)
MEMO
- The bit reversing switch cannot be used.
Please use the set switch and the reset switch of the bit.
(Added the following in 2011/8/9)
- Data addition, the data subtraction, the digit addition, the digit subtraction, and the operations
in the word address cannot be performed.
(In-Sight Vision Systems Driver connection manual P15)
MEMO
- Register Name IMAGE/SaveVolume
The image saved time might take three minutes or more.
MEMO
- The bit reversing switch cannot be used.
Please use the set switch and the reset switch of the bit.
(Added the following in 2011/8/9)
- Data addition, the data subtraction, the digit addition, the digit subtraction, and the operations
in the word address cannot be performed.
(In-Sight Vision Systems Driver connection manual P15)
MEMO
- Register Name IMAGE/SaveVolume
The image saved time might take three minutes or more.
Inquiry
If you have any inquiries, please contact our sales office in your region.
For contact information, please refer to the "Inquiry" page.