Important Announcement to our Customers using pass-through function to ladder programming by USB communication with GP3300 series
Posted: 2007, July 12
Thank you very much for your continuous use of Pro-face products.
We have confirmed that the following symptom has been seen in GP3300 series.
The symptom for this problem are indicated below.
We sincerely apologize for any inconvenience this may cause you.
Brief Overview
A communication error may occur, which is very rare, when using pass-through function to ladder programming by USB communication with GP3300 series due to some problem with USB interface.
Reoccurrence of this symptom is extremely rare.
Models Concerned
RoHS compliant models for GP3300 Series except for GP-3302B, and which were shipped before April, 2007.
To identify the products individually, please refer to the month of manufacture shown on the sticker attached on the top face of the products.
| List of Models concerned | |
|---|---|
| AGP3300-L1-D24 | AGP3300-T1-D24 |
| AGP3300-L1-D24-D81C | AGP3300-T1-D24-D81C |
| AGP3300-L1-D24-D81K | AGP3300-T1-D24-D81K |
| AGP3300-L1-D24-FN1M | AGP3300-T1-D24-FN1M |
| AGP3300-S1-D24 | AGP3300-T1-D24-M |
| AGP3300-S1-D24-D81C | AGP3301-L1-D24 |
| AGP3300-S1-D24-D81K | AGP3301-L1-D24-M |
| AGP3301-S1-D24 | |
Remedy
If you are a user of the products listed above, and have encountered a symptom of having some transfer error when using pass-through function by USB communication, please contact our sales representative or visit the following site.
Inquiry
If you have any inquiries, please contact our sales office in your region.
For contact information, please refer to the "Inquiry" page.