4.1 Creating HMI Displays

This section explains GP-Pro EX installation, startup, new screen creation, connecting with device/PLC, and workflow to the start of screen creation.

Click the link to view the page explaining each process.

To convert GP-Pro/PBIII for Windows project files (*.prw) into GP-Pro EX Project files (*.prx), please see the following.
2.1 Compatibility with Pro-face Software

1. Install	Readme.txt (Install CD-ROM) If you do not enter the serial number and keycode during GP-Pro EX installation, you can run project files transfers to GP-4100 series display units only. To transfer projects to other types of display units, from the [Help] menu select [Key Code]. Enter the the serial number and key code in the dialog box.
2. Start the software and create a new project	Set the display unit and device/PLC type and the device/PLC communication environment. 5.2.1 Procedure - Starting/Creating/Saving/Exiting
3. Create a new screen	5.2.1 Procedure - Starting/Creating/Saving/Exiting
4. Draw	Creating a Screen
5. Confirm the device/PLC communication environment	GP-Pro EX Device/PLC Connection Manual
6. Save the project	Upon saving, the project checks for errors. 5.2.1 Procedure - Starting/Creating/Saving/Exiting
7. Test Projects	You can confirm any problems on your computer screen before you transfer. Chapter 32 Simulation
8. Transfer project to a display unit	You can confirm communication settings with the device/PLC from the display unit screen. 33.1 Settings Menu GP-Pro EX Device/PLC Connection Manual
9. Connect a display unit and device/PLC	GP-Pro EX Device/PLC Connection Manual
10. Run