Preface
1.Welcome to GP-Pro EX (Supported Features)
2.Converting GP-Pro PBIII for Window Project Files
3.Environment
4.Development Process
5.Start to Finish (Start / Create / Save / Exit)
6.Font
7.Device/PLC Communication
8.Draw (Figures/Text)
9.Displaying Pictures
10.Switches
11.Changing and Saving Screens
12.Window Display
13.Using Lamps
14.Data Display/Data Input (Numeric Display/Text Display/Input)
15.Keypad Input (Setting up and Editing Keypads)
16.Bar Code/USB Keyboard Inputs
17.Displaying and Changing Text (Message Display)
18.Graph Display
19.Alarms
20.Animating Screen Objects
21.Using Scripts (Programming without Parts)
22.Enforcing Security (Passwords, Operation Logs, Global Interlock, Interlock)
23.Scheduling Operations
24.Data Sampling
25.Recipes
26.Using Audio Notifications
27.Recording and Playing Video
28.Using Logic Functions
29.Logic Programming
30.Controlling External I/O
31.Logic Instruction List
32.Simulation
33.Transfer
34.Print
35.Adjusting the Time and Screen Saver
36.Display or Operate a Computer from the Display Unit (Remote PC Access)
37.Viewing and Operating Display Unit Data (GP-Viewer EX/Web Server)
38.Using IPC Series Like a GP (WinGP)
39.Hand-held GP
A.Appendix
T.Troubleshooting
    T.1 Identifying the problem
    T.2 Problems with PC operation
    T.3 Problems with Display operation
    T.4 Problems with communication with connected devices
    T.5 Problems communicating with I/O units
       T.5.1 Devices connected to the DIO interface do not turn ON/OFF
       T.5.2 FLEX NETWORK I/O unit will not operate
       T.5.3 FLEX NETWORK analog unit, 2ch analog unit will not operate
       T.5.4 FLEX NETWORK single-axis positioning unit, FLEX NETWORK high speed counter unit will not operate
       T.5.5 Communication fails with the GP3000 Series PROFIBUS Slave Unit
       T.5.6 Image does not appear when using the Video Module
       T.5.7 DeviceNet (Slave) will not communicate
       T.5.8 Communication fails with the EX module
       T.5.9 USB transfer cable is not recognized
       T.5.10 USB-Serial (RS-232C) conversion cable is not recognized
       T.5.11 Communication fails with all the devices connected to a CANopen master unit
       T.5.12 Communication fails with part of the device connected to a CANopen master unit
    T.6 Errors displayed on a PC
    T.7 Display-related errors
    T.8 Errors displayed with an expansion unit
    T.9 Errors displayed by Internet Explorer
    T.10 Errors displayed when the project converter is used
    T.11 If the problem still continues...
M.Display System Settings (Offline)