A.1.1 Settings Menu

Communicating with a Device/PLC Using the Direct Access Method

Overview A.1.2 Communicating with a Device/PLC Using the Direct Access Method

This is useful when connecting to a device/PLC that is supported by the display unit.

 

Using the Memory Link Method with Unsupported Devices/PLCs

Overview A.1.3 Using the Memory Link Method with Unsupported Devices/PLCs

Steps 21.5.1 Procedure - Communicating with Unsupported Peripheral Devices

Steps A.1.3 Using the Memory Link Method with Unsupported Devices/PLCs

Create an extended script to output data read from a barcode connected to the USB to a serial printer connected to COM1.

Create and execute all programs needed to communicate on the device/PLC side (computer, microprocessor board) with the Memory Link Method.