34.11.1 Operating Systems that support Transfer Tool

The installation requirements when installing only the Transfer Tool is as follows.


Windows® PC/AT compatible machine

Operating System

  • Windows 11

64-bit versions of Home, Pro, and Enterprise

  • Windows 10

32-bit/64-bit versions of Home, Pro, and Enterprise

  • Windows 8.1

All editions for 32-bit/64-bit versions

  • Windows 7

All editions of 32 or 64 bit version (Service Pack 1 or later)

Other non-operating-system programs

  • .NET Framework Ver.3.5 SP1 and Ver.4.8*2

  • Internet Explorer Version 6.0 or later


  • Windows 11, Windows 10, Windows 8.1, Windows 7

1 GB or more (2 GB or more is recommended)


  • Windows 11, Windows 10, Windows 8.1, Windows 7

Pentium IV 1GHz or faster

Hard disk space*1

1 GB or more


  • Display language of the software menu

English, Japanese

Required equipment

  • Mouse (compatible with the above operating systems)


  • DVD drive

Used during installation.

  • USB port and USB cable*3, USB storage

Required when transferring data using USB cables or using the USB storage (Memory Loader).

  • LAN port and LAN cable

Required when transferring data via Ethernet. Hub may be required depending on your computer and network card.

  • CF Card drive and optional CF Card (sold separately)*4

A CF Card reader and a PCMCIA conversion card are required when transferring data (Memory Loader) using a CF Card.

  • SD Card drive, and a SD Card compliant to SD or SDHC standards

Required when transferring data (Memory Loader) using an SD Card.

  • Windows-compatible modem that supports telephone communication*5

Required when transferring data via modem. Must support AT commands.

*1 Free space required for installation.

*2 If .NET Framework does not exist or an earlier version is installed on the computer, .NET Framework is automatically installed, For disk space requirements, visit the Microsoft website.
To install the .NET Framework on Windows 8.1 or later, a network connection or installation media for the operating system is required. For more details, please refer to the following.
T.2.2.7 Does .NET Framework required appear?

*3 USB cables you can use for transfer operations differ depending on the display unit model.
34.2 Transferring Project Files via USB Transfer Cable

*4 If you use a commercially available CF Card, it may not have been fully tested.

*5 You cannot use modems that need to be connected to the center.