This example shows how to send sampling CSV file via e-mail.
Please refer to the Settings Guide for details.
5.4.21 System Settings [E-mail] Settings Guide
25.11.4 Display/Save in CSV
For the procedure for saving alarm CSV file, refer to the following.
20.8.1 Procedure - Storing Alarm Messages in External Storage
E-mail Settings
From the [Project (F)] menu, select [System Settings (C)] - [E-mail (A)].
See the following for the settings. Settings for [Control Word Address] and [Attachment File Name] are not required.
Sampling Settings
In the [Common Settings (R)] menu, click [Sampling (D)] or click 
, and a list of registered sampling groups appear. In the row for [Group] 1, double-click anywhere outside the [Group] and [Comment] columns to open the sampling group 1 setup screen.
(For information about Address/Action settings, please refer to 25.3.1 Procedure - Sampling Data at Constant Intervals.)
Open the [Display/Save in CSV] tab. Select the [Display/Save in CSV] check box.
To save, select the [CSV Save Control Word Address] check box to set the word address.
Two consecutive words from the specified address are used.
Select [Save In].
Select the [Send E-mail] check box and select a number for [Receiver Groups]. Specify the receiver group number configured in [System Settings] - [E-mail] - [Receiver Groups] tab.