Check if the inputs and outputs for devices connected to the AnyWire slave unit operate normally.
For details about the setting screen, refer to the setting guide.
M.24.3.4 Peripheral Settings - I/O Driver (AnyWire Bus D2 Driver)
Enter offline mode and touch [Peripheral Settings] in the item change over buttons.
In the [Peripheral Settings] screen, touch [I/O Driver] and then [AnyWireBus D2 Driver].
In the [AnyWireBus D2 Driver] screen, touch [I/O Monitor].
Select the operation you want to check: [Input/Output], [Area No (0-27)], or [Type].
To display the I/O monitor operation screen, touch the right arrow [→]. The Input/Output operation screen displays the input status as ON or OFF. Or, you can perform outputs.