>PL-X930 Series >PL-X930 XP Embedded Service Pack2 Update
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Download
Note:
To use this update, the Enhanced Write Filter (hereafter described as "EWF") must be set to "Disable". After disabling the Write Filter with the EWFSettingTool, please restart your system before installing.
Please close all applications before installing, including KeyClick.
Title
PL-X930 XP Embedded Service Pack2 Update
Version
Due to this Installer, PLX930 version is upgraded.
When some errors simultaneously occur to the monitoring items where "OS Restart" or "OS Shutdown" for the error actions is specified, the OS logs off.
Deletion of the "Connecting" dialog to be displayed at the startup
In the usage of System Monitor API, System Monitor service has to be stopped in some APIs.
EWFSettingTool version upgrade (V1.05 → V1.07)
The following setting was added:
Addition of EWF status display onto the taskbar
The following issues were corrected:
Change of GUI dialog
Write filter function does not operate normally when a Proface CF card with
the "HB28B***C8*" marking on the lower right of the back is connected with PCMCIA I/F during SID creation (= "Change Security ID" is selected in "EWFSettingTool.exe").
Phenomenon
When starting "EWFSettingTool.exe", the following display appears.
When the error occurs before updating, take the steps as shown below: * For this solution, you do not have to remove the CF card in PCMCIA I/F.
Select [Start] R [Run] in this order.
Enter "Rundll32 ewfdll.dll ConfigureEwf" and click [OK]. * When typing, upper case letters and lower case letters must be discriminated.
Restart the panel computer.
After the restart, Write Filter function is disabled. Install the update module.
Product version upgrade (V2.00 → V3.00)
The following settings were added:
Addition of Backlight ON/OFF application (Disp.exe)
Addition of Remote Shutdown Client application (RSCLT.exe)
