Products
Download
Contact us
Back to Top

PL Series

>PL3000 Series >System Monitor Setting File for PL3000 Series

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

  • This system monitor configuration file has to be installed after the latest version of the system monitor is installed.
    ->System Monitor for PL3000 Series
  • When you install the system monitor after installing this system monitor setting file, the updated monitoring information is deleted. When you have installed the system monitor, be sure to install this system monitor setting file once again.
  • Windows® XP Embedded users need to set the write filter to “Protect OFF” by using EWFSettingTool and then restart the system before the installation.
Title System Monitor Setting File for PL3000 Series
File Name PL3000_SystemMonitor_Configuration_300.exe
File Size 139KB
Version 3.00
Supported OS
  • Windows® 2000
  • Windows® XP
  • Windows® XP Embedded
Description This is a definition file to update the monitoring information.
Add the monitoring information of the following devices.

Model

Rev.

CA3-CFCALL/128MB-01

Rev. E to F

CA3-CFCALL/256MB-01

Rev. E to F

CA3-CFCALL/512MB-01

Rev. E to F

CA3-CFCALL/1GB-01

Rev. E to F

APL3000-HD60* Hard Rev. D to G
APL3000-HD250* Hard Rev. C to E
Update Contents Ver. 3.00 (Aug. 3, 2015)
  • SMART monitoring information is renewed.
  • 250GB HDD Hard Rev. E, 60GB HDD Hard Rev. G is supported.
Supported Version When customers use the following version, update is required.
-> How to confirm your Software Revision

HDD Type with a preinstalled OS
Model Software Revision Volume Label
APL3000-HD60-W2K-CD-BLD
[-] to [F]
APL3KCD2KJ1 to APL3KCD2KJ8
APL3000-HD250-W2K-CD-BLD
[-] to [B]
APL3000-HD60-WXP-CD-BLD
[-] to [F]
APL3KCDXPJ1 to APL3KCDXPJ8
APL3000-HD250-WXP-CD-BLD
[-] to [B]
APL3000-HD60-WXP/ML-CD-BLD
[-] to [F]
APL3KCDXPM1 to APL3KCDXPM8
APL3000-HD250-WXP/ML-CD-BLD
[-] to [B]
APL3000-HD60-W2K-CM-BLD
[-] to [F]
APL3KCM2KJ1 to APL3KCM2KJ8
APL3000-HD250-W2K-CM-BLD
[-] to [B]
APL3000-HD60-W2K/ML-CM-BLD
[C] to [F]
APL3KCM2KM4 to APL3KCM2KM8
APL3000-HD250-W2K/ML-CM-BLD
[-] to [B]
APL3000-HD60-WXP-CM-BLD
[-] to [F]
APL3KCMXPJ1 to APL3KCMXPJ8
APL3000-HD250-WXP-CM-BLD
[-] to [B]
APL3000-HD60-WXP/ML-CM-BLD
[-] to [F]
APL3KCMXPM1 to APL3KCMXPM8
APL3000-HD250-WXP/ML-CM-BLD
[-] to [B]

SSD Type with a preinstalled OS
Model Software Revision Volume Label
APL3000-SD16-WXP-CD-BLD
[D] to [F]
APL3KCDXPJ5 to APL3KCDXPJ8
APL3000-SD16-WXP/ML-CD-BLD
[D] to [F]
APL3KCDXPM5 to APL3KCDXPM8
APL3000-SD16-WXP-CM-BLD
[D] to [F]
APL3KCMXPJ5 to APL3KCMXPJ8
APL3000-SD16-WXP/ML-CM-BLD
[D] to [F]
APL3KCMXPM5 to APL3KCMXPM8

XP Embedded
Model Software Revision Volume Label
APL3000-XPE2G-CD-BLD
[-] to [C]
PL3KCDXPEM1 to PL3KCDXPEM4
APL3000-XPE2G-CM-BLD
[-] to [C]
PL3KCMXPEM1 to PL3KCMXPEM4

When customers use the following product, installation is required.

Type without the preinstalled OS
Model
APL3000-HD60
APL3000-HD60-BLD
APL3000-HD250
APL3000-HD250-BLD
APL3000-SD16
APL3000-SD16-BLD

When customers use the above version, update is required.
-> How to confirm your Software Revision
How to install (This is a self-extracting file.)
  1. Click on the above file name to download the data to a desired folder.
  2. Double-click the downloaded file. Then, installation starts automatically.
  3. Confirm that the “Update completed” dialog is displayed, and click [OK].
  4. Restart the panel computer.

Update History:

[Ver. 3.00] (Aug. 3, 2015)

The following functions were added.
  • SMART monitoring information is renewed.
  • 250GB HDD Hard Rev. E, 60GB HDD Hard Rev. G is supported.

[Ver. 2.00] (Mar. 8, 2013)

The following functions were added.
  • SMART monitoring information is renewed.
  • 250GB HDD Hard Rev. C is supported.

[Ver. 1.00] (May 31, 2012)
New


Last Updated: Aug. 3, 2015

Posted: May 31, 2012
| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.