Products
Download
Contact us
Back to Top

PL Series

>PL3000 Series >System Monitor for PL3000 Series

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

  • Install this system monitor in the following cases:
  • When customers who have used the type without a preinstalled OS want to install the OS as shown in the table below.
  • When customers who have used the one shown in “Applicable Version” below want to update the version.
  • It is unnecessary to install this system monitor when customers have used the type with a preinstalled OS other than the one shown in “type with a preinstalled OS” below.
  • After installing this system monitor once, it is not possible to uninstall.
  • Windows® XP Embedded users need to set the write filter to “Protect OFF” by using EWFSettingTool and then restart the system before the installation.
  • When this System Monitor is installed, all setting in System Monitor Property are returned to the default settings. When you have changed the default settings, make the settings once again after the version upgrade.
Title System Monitor for PL3000 Series
File Name PL3000_SystemMonitor_117a.exe
File Size 3,685KB
Version 1.17a
Supported OS
  • Windows® 2000
  • Windows® XP
  • Windows® XP Embedded
* Windows® XP and Windows® XP Embedded is only for the PL3000 SSD model
Description This is a System Monitor for PL3000 Series.
After installing this program, you can use the state monitor function of the hardware.
Updated Contents Ver. 1.17a (Jun. 13, 2011)
The following issue was updated:
  • S.M.A.R.T. monitoring information was updated.
Applicable Version When customers use the following version, update is required.
-> How to confirm your Software Revision

HDD Type with a preinstalled OS
Model Software Revision Volume Label

APL3000-HD60-W2K-CD-BLD
APL3000-HD250-W2K-CD-BLD

[-] to [D]

APL3KCD2KJ1 to APL3KCD2KJ6

APL3000-HD60-WXP-CD-BLD
APL3000-HD250-WXP-CD-BLD

[-] to [D]

APL3KCDXPJ1 to APL3KCDXPJ6

APL3000-HD60-WXP/ML-CD-BLD
APL3000-HD250-WXP/ML-CD-BLD

[-] to [D]

APL3KCDXPM1 to APL3KCDXPM6

APL3000-HD60-W2K-CM-BLD
APL3000-HD250-W2K-CM-BLD

[-] to [D]

APL3KCM2KJ1 to APL3KCM2KJ6

APL3000-HD60-W2K/ML-CM-BLD
APL3000-HD250-W2K/ML-CM-BLD

[C] to [D]

APL3KCM2KM4 to APL3KCM2KM6

APL3000-HD60-WXP-CM-BLD
APL3000-HD250-WXP-CM-BLD

[-] to [D]

APL3KCMXPJ1 to APL3KCMXPJ6

APL3000-HD60-WXP/ML-CM-BLD
APL3000-HD250-WXP/ML-CM-BLD

[-] to [D]

APL3KCMXPM1 to APL3KCMXPM6


SSD Type with a preinstalled OS
Model Software Revision Volume Label
APL3000-SD16-WXP-CD-BLD [D]

APL3KCDXPJ5

APL3000-SD16-WXP/ML-CD-BLD [D]

APL3KCDXPM5

APL3000-SD16-WXP-CM-BLD [D]

APL3KCMXPJ5

APL3000-SD16-WXP/ML-CM-BLD [D]

APL3KCMXPM5


XP Embedded
Model Software Revision Volume Label
APL3000-XPE2G-CD-BLD [-] to [B]

PL3KCDXPEM1 to
PL3KCDXPEM3

APL3000-XPE2G-CM-BLD [-] to [B]

PL3KCMXPEM1 to
PL3KCMXPEM3


When customers use the following product, installation is required.

Type without the preinstalled OS
Model
APL3000-HD60
APL3000-HD60-BLD
APL3000-HD250
APL3000-HD250-BLD
APL3000-SD16
APL3000-SD16-BLD

-> How to confirm your Software Revision

Installation (This file is self-extracting.)

  1. Click "PL3000_SystemMonitor_117a.exe" and download it to the appropriate folder.
  2. Double-click the downloaded file. (Any extraction destination will do.)
  3. When [OK] is clicked, the file is extracted. (If the same name file has already existed, it is overwritten.)
  4. Double-click the "PL3000_SystemMonitor_117a.exe" file that is extracted in Step 2 above to start the install.
  5. Complete the install by following the messages on the window.
  6. Restart the panel computer.
  7. After the restart, click OK if the following message is displayed: "The constitution was changed. Start configuration." The restart process will be executed again automatically.

Update History:

[Ver. 1.17a] (Jun. 13, 2011)

The following issue was updated:
  • S.M.A.R.T. monitoring information was updated.

[Ver. 1.17] (Oct. 26, 2010)

The following issue has been changed.
  • S.M.A.R.T. error message -> S.M.A.R.T. warning message
The following function has been added.
  • Function to support the product with the SSD

[Ver. 1.14b] (Jun. 9, 2010)

The following issue was corrected:
  • The backlight burnout error may be mistakenly detected in some cases.
The following issue was updated:
  • S.M.A.R.T. monitoring information was updated.

[Ver. 1.14a] (Oct. 17, 2008)

The following function has been added:
  • The threshold for CPU voltage monitoring is settable according to each CPU's specifications.

[Ver. 1.14] (Jul. 28, 2008)

The following function has been added:
  • Battery unit has been supported.
The following issue was corrected:
  • The RAS output's inversion switch in the main unit did not work.

[Ver. 1.13] (Feb. 18, 2008)

The following function has been added:
  • Models with liquid crystal panel have been supported.
The following issue was corrected:
  • The task tray icons might not be changed successfully.

Last Updated: Jun. 13, 2011
Posted: Oct. 5, 2007

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.