Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
The required versions of software for this driver installer are as follows.
GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later To check your version, go to the ” Help ” menu → ” Version Info ”.
Related Devices
KV-700 Series
KV-1000 Series
KV-3000 Series
KV-5000 Series
KV-7000 Series
KV-Nano Series
Related Units
Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Required driver versions for different models are listed below.
For details, please read the following
PDF:key_keth.pdf ( 858KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents
Ver. 1.16.04 (Feb. 23, 2017)
The following setting was added:
Expand MR device address (Max. MR999 to MR3999) for KV-7500 CPU.
Installation (This file is self-extracting.)
Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
Click on the above file name to download the data to desired folder.
After the download to your PC is finished, double-click on the file's icon to start the installer program.
After the installer starts, follow the instructions given on each screen.
After installation, execute GP-Pro EX.
After installation, click on the Device/PLC area's [KEYENCE Corporation] selection and select [KV-700/1000/3000/5000 Ethernet].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.16.04] (Feb. 23, 2017)
The following target was added:
Expand MR device address (Max. MR999 to MR3999) for KV-7500 CPU.
[Ver. 1.16.03]
The following target was added:
GP4000H Series was supported.
[Ver. 1.15.03] (Oct. 2, 2015)
The following settings were added:
KV-7000 Series was supported.
KV-Nano Series was supported.
[Ver. 1.14.03] (Jul. 27, 2015)
The following setting was added:
LT3000 Series was supported
[Ver. 1.13.03]
The following setting was added:
GP4100 Series was supported. * To use GP4100 Series, GP-Pro EX Ver. 2.70.000 or later is required.
The following issue was corrected:
When power to PLC is supplied again during communication, the communication error occurs and auto recovery may not be made.
[Ver. 1.12.02]
The following setting was added:
List Register of Individual Device Setting was supported. (GP3000H only)
[Ver. 1.11.02] (Aug. 21, 2008)
The following issue was corrected:
When the KV-700/1000 Series is selected, the address of an Input Relay / Output Relay / Internal Auxiliary Relay cannot be correctly set.
[Ver. 1.11.01] (Mar. 17, 2008)
The following settings were added:
KV-3000Series/KV-5000 Series are supported.
The driver name is changed to "KV-700/1000/3000/5000 Ethernet".
The following issue was corrected:
Cannot write correctly to TS, CS, TC, CC, CTH, CTC
