
Functional Specifications
GP-4311HT | |||
---|---|---|---|
Display Type | TFT Color LCD | ||
Display Size | 5.7" | ||
Resolution | 640 x 480 Pixels (VGA) | ||
Dot Pitch | W0.18 x H0.18mm [W0.01 X H0.01in.] | ||
Effective Display Area | 115.2 x 86.4mm (4.54 x 3.4in) | ||
Display Colors | 65,536 Colors (No blink) / 16,384 Colors (Blink) | ||
Backlight | White LED (Not user replaceable. When replacement is required, contact your local distributor.) | ||
Brightness Control | 16 Levels (Adjusted with touch panel) | ||
Contrast Control | Not Applicable | ||
Language Fonts | Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable. | ||
Character Sizes | Standard Font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 Pixel Fonts, Stroke Font: 6 to 127 Pixel Fonts | ||
Font Sizes | Standard font: Width can be expanded up to 8 times., Height can be expanded up to 8 times. *1 | ||
8 x 8 Dots | 80 Char. x 60 Rows | ||
8 x 16 Dots | 80 Char. x 30 Rows | ||
16 x 16 Dots | 40 Char. x 30 Rows | ||
32 x 32 Dots | 20 Char. x 15 Rows | ||
Application Memory | Flash EPROM 32MB *2 | ||
Data Backup | SRAM 320KB *2 *3 | ||
Clock Accuracy | ±65 sec./month (deviation at room temperature and power is OFF) *4 | ||
Touch Panel Type | Resistive Film (Analog) | ||
Touch Panel Resolution | 1,024 x 1,024 | ||
Touch Panel Service Life | 1 million times or more | ||
Interface | Serial (COM1) | Asynchronous Transmission:RS-232C/RS-422/RS-485, Data Length: 7 or 8 bits Stop Bit: 1 or 2 bits Parity: None, odd, or even, Data transmission speed: 2,400 to 115,200bps, 187,500bps (MPI) Maximum Communication Distance *5: When using RS-232C: 15m (49.2ft) When using RS-422 at 115,200bps : 1,200m (3937ft) |
|
Ethernet (LAN) | IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX Connector: Modular Jack (RJ-45) x 1 Maximum Communication Distance *5: 100m (328.1ft) |
||
USB (Type-A) | Conforms to USB2.0 (TYPE-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500mA or less, Communication Distance: 5m [16.4ft.] or less | ||
USB (Type mini-B) | Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5m [16.4ft.] or less | ||
CF Card | - | ||
SD Card | SD Card Slot x 1 | ||
Function Switch | 11 Switches (plus 1 Operation Switch) (DOUT: 2 Open Collector Output [F1, F2], Operation Switch: 1 Open Collector Output [O.P]) | ||
Emergency Switch Output | Push-lock Switch, 3 Contacts (A-contact: 1 Contact, B-contact: 2 Contacts), Rated Voltage: DC 30V, Maximum Rated Current: 1A, (Minimum Allowable Load: DC 5V, 1mA), Applicable Standards *6: IEC/EN60947-5-1, IEC/EN60947-5-5, UL508, CSA C22.2 No.14 | ||
3-Position Enable Switch Output | GP Rear Panel Switch, 2 Contacts (A-contact), Rated Voltage: DC 30V, Maximum Rated Current: 700mA (Minimum Allowable Load: DC 3V, 5mA), Applicable Standards *6: IEC/EN60947-5-8, 60204-1, UL508, CSA C22.2 No.14, ISO12100/EN12100-1,2, ISO11161/prEN11161, ISO10218/EN775, ANSI/RIA R15.06, ANSI B11.19 | ||
Key Switch Output | 1c-Contact, Rated Voltage: DC 24V, Maximum Rated Current: 300mA | ||
External *7 | Operation Output | Open Collector Output: 1 Point, Rated Voltage: DC 24V, Maximum Rated Current: 300mA | |
External Buzzer Output | Open Collector Output 1 Point, Rated Voltage: DC 24V, Maximum Rated Current: 300mA | ||
DOUT Output | Open Collector Output: 2 Points [F1, F2], Rated Voltage: DC 24V, Maximum Rated Current: 300mA/point |
General Specification
GP-4311HT | |
---|---|
International Safety Standards | ![]() ![]() ![]() ![]() ![]() |
Rated Input Voltage | 24Vdc |
Input Voltage Limits | DC 19.2 to 28.8Vdc |
Allowable Voltage Drop | 10ms or less |
Power Consumption | 12W or less (When power is not supplied to external devices: 8W or less) |
In-Rush Current | 35A or less |
Voltage Endurance | 500Vac, 20mA for 1 minute (between charging and FG terminals) |
Insulation Resistance | 500Vdc, 10MΩ or more (between charging and FG terminals) |
Surrounding Air Temperature | 0 to 40°C (32 to 104°F) |
Storage Temperature | -20 to 60°C (-4 to 140°F) |
Ambient Humidity | 10% to 90% RH (Non Condensing, Wet Bulb Temperature 39°C [102.2°F] or less) |
Storage Humidity | 10 to 90% RH (Wet Bulb Temperature: 39°C max. - No condensation.) |
Dust | 0.1 mg/m3 (10-7 oz/ft3) or less (Non-conductive Levels) |
Pollution Degree | For use in pollution degree 2 environment |
Atmosphere | Free of corrosive gases |
Air Pressure (Altitude Range) | 800 to 1,114hPa (2,000m [6,561ft] or lower) |
Vibration Resistance | IEC/EN 61131-2 compliant 5 to 9Hz Single amplitude 3.5mm (0.14 in.) 9 to 150Hz Fixed acceleration: 9.8m/s2 X, Y, Z directions for 10 cycles (Approximately 100 Minutes) |
Shock Resistance | IEC/EN 61131-2 compliant 147m/s2, X, Y, Z directions for 3 times |
Noise Immunity | Noise Voltage: 1,000Vp-p Pulse Duration: 1ms, Rise Time: 1ns (via noise simulator) |
Electrostatic Discharge Immunity | Contact Discharge Method: 6kV (IEC/EN 61000-4-2 Level 3) |
Drop Resistance | IEC 61131-2 Compliant 1.0m [3.3ft] Drop - 2 Times |
Grounding | Functional Grounding: Grounding resistance of 100Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard (same for FG and SG terminals). |
Structure *8 | IP65F |
Weight Approx. | 910g (2.01lb) or less: without a key switch, unit only 960g (2.12lb) or less: with a key switch, unit only |
External Dimensions
Models with an Emergency Stop Switch or Stop Switch

- Front
- Left
- Bottom
Models without any Stop Switch

- Front
- Left
- Bottom
Dimensions with a Stop Switch Guard

- Front
- Left
- Bottom
Conversion Adapter

Parts Identification
GP4000H unit
Front

(A) Emergency stop switch / Stop switch (B) Status LED (POWER) (C) Operation LED (O.P.) (D) Operation switch (E) Function switches
Top

(F) Maintenance cover (G) Key switch (H) USB (Type A) interface (I) SD card slot (J) USB (mini-B) interface
Right and Rear

(K) 3-position enable switch (L) Neck strap attachment slot (M) Hanger (N) SD card access LED (O) Touch pen (P) Wall hanging adapter attachment slots (Q) Hand strap attachment slots (R) Insertion hole (with cover) for function switch sheet (S) Interface for direct-connect cable (with connector cover)
Conversion Adapter
Bottom

(T) Ethernet Interface (U) Connector Cover (V) Serial Interface
- Other font sizes can be set up with the Editor software.
- Amount of memory you can use differs depending on your screen editing software.
- Rechargeable lithium battery for backup memory.
- Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
- When using the Conversion Adapter (model number: AGP3000H-ADPCOM-01), the distance includes the cable length between this product and the Conversion Adapter.
- Overall system may not meet these standards if implemented outside these parameters. Follow these standards when designing the system.
- The conversion adapter is required to use the external output interface (DOUT) and build a system.adapter.
- This product has been tested using conditions equivalent to the standards shown in the specification.