You can print up to 160 characters per line. Characters that exceed the maximum are not printed.
You cannot designate the size of the characters to print.
The number of characters that can be printed on one line depends on the printer and paper size. When the characters in a single line do not fit onto the paper width, the outputted results will differ depending on the font and printer.
Standard Font
When text does not fit the paper width, there are printers that do not print text outside the paper width, printers that automatically insert line breaks to print all text from each line, and printers that do not print properly.
Stroke Font
Text that does not fit the paper width does not print.
Regardless of the printer color settings (monochrome/color), all data is printed in black and white.
When the sampling group font type is set to [Stroke Font] and the language is set to [Standard Font] of [Chinese (Traditional)], [Chinese (Simplified)], or [Korean], text will be printed out as image data, and it may take some time to print.
If real-time printing of another sampling group occurs during a real-time print, data will be mixed. It does not separate each sampling group.
DO NOT enter other printing commands during real-time printing. If an Alarm History printing command occurs during real-time printing, the alarm history and other data will be mixed together during printing.
Some printers used cannot print per line in real-time printing. This is because the printers don't support paper feed per line.
If sampling data is deleted during printing, printing will not continue. If the display unit is turned OFF during printing, jobs in the queue are lost.
The calculation operations are carried out in 32 bit length. If the calculation data has more digits (exceeds 32 bits), the correct value will not be printed.
If sampling data changes when the [Overwrite old data after finishing the specified cycles] check box is selected, the printing speed can be slower than the data overwrite and store speed if the [Occurrences] is small or a short Sampling Cycle is being used. When sampling data is overwritten before printing, the data prior to the overwrite cannot be printed.
In the sampling group's Address, if the [Bit Length] or [Addressing] change, the print format will be reset.
When changing the print mode from [Custom Settings] to [Basic], all customized settings will be reset.
When using Custom Settings, the maximum number of columns that can be set with the print format is 521 columns. The maximum number of rows is 4204.
The maximum number of columns is the total of the Date, Time, Data, Text, and Ruled Line columns. Header/footer areas are not included.
Please use the same data format for the numeric value and total fields. If the formats differ, then the calculated value may not display correctly.
If sampled data exists from the time batch print is started (the Print Control Address bit is turned ON) to the time [Print Completion Bit Address] is turned ON, the data will be printed. However, a print time lag occurs from the time when a display unit determines that all sampled data is printed (no more updated sampled data) and turns on the print completion bit ON. Any sampled data during that time will not be printed.
You cannot print the search/sort result.