3.2.2 Transfer Tool Installation Requirements

The installation requirements when installing only the transfer tools is as follows.

	Required Specifications	Remarks
PC	Windows® PC/AT compatible machine
CPU	Pentium III 1 GHz or faster
Operating System	Windows 98 (Second Edition or later) / Me / 2000 (Service Pack 3 or later) / XP (Home Edition/Professional) or later / Vista (Home, Premium, Business)	Supports Japanese and English. When using Windows 98/Me, you cannot transfer to GP-4100 series.
Memory	Windows 2000, Windows XP 128 MB or more Windows Vista More than 1 GB	Windows 2000, Windows XP 512 MB or more is recommended. Windows Vista 2 GB or more is recommended
Hard Disk Space	133 MB or more	This capacity is required to install Movie Converter.
CD-ROM drive	Those supported by the above operating systems	Use during installation.
Mouse	Those supported by the above operating systems	Required.
Printer	Those supported by the above operating systems
USB Port	Required when transferring data via USB cable. Other than GP-4100 series Digital Electronics Corporation USB Transfer Cable CA3-USBCB-01 GP-4100 Series Digital Electronics Corporation USB Transfer Cable ZC9USCBMB1 or USB cable (Type A mini B) You can also transfer using the USB Memory Loader
LAN port	Required when transferring data via Ethernet. LAN cable (sold separately) HUB
Environment that supports a modem connection (when transferring via modem)	Windows® compatible modem	AT commands must be supported. Modems that need to be connected to the center cannot be used.
CF Card drive	When doing CF Card transfers or reading and writing to a CF Card, a CF Card reader and a PCMCIA conversion card are required. Pro-face CF Card (sold separately)