33.1 Settings Menu

Transferring Project Files via USB Transfer Cable

Overview 33.2 Transferring Project Files via USB Transfer Cable

Steps 33.2.1 USB Transfer - Transferring from Computer to Display Unit (Send)

Use a USB transfer cable to transfer project files (*.prx).

 

Transferring Project Files via Ethernet (LAN)

Overview 33.3 Transferring Project Files via Ethernet (LAN)

Steps 33.3.1 Transfer - Transferring from Computer to Display Unit (Send)

Use a LAN cable to transfer project files (*.prx).

 

Comparing Project Changes Prior to Transfer

Overview 33.4 Comparing Project Changes Prior to Transfer

Steps 33.4.1 Procedure - Comparing Project Changes Prior to Transfer

Compare the project files (*.prx) on the PC and display unit to check which screens have been updated.

 

Transferring Just Data to a CF Card

Overview 33.5 Transferring Just Data to a CF Card

Steps 33.5.1 Transfer - Transferring Only Data to a CF Card

Without transferring the project file, copy recipe data to the CF Card in the display unit, and alarm data from the CF Card to a PC.

 

Secure Transfer with Passwords

Overview 33.6 Secure Transfer with Passwords

Steps 33.6.1 Procedure - Secure Transfer with Passwords

When transferring data, a password can be required to prevent unauthorized access and transfer.

 

Transferring Project Files Using a CF Card or USB Storage

Overview 33.7 Transferring Project Files Using a CF Card or USB Storage

Steps33.7.1 Transfer - Transferring Project Files from PC to Display Unit

Transfers project files between the display unit and your PC using a CF Card or USB storage.

 

Updating Remote Screen Data via Modem

Overview 33.8 Updating Remote Screen Data via Modem

Steps 33.8.1 Transfer - Updating Remote Screen Data via Modem

Connect the modem to the display unit and transfer the screen data from your PC to the display unit.

 

Checking Errors

Overview 33.9 Checking Errors

Steps 33.9.1 Procedure - Checking Errors

Check errors before you send the project data.