You can set operation log recording for each part.
Select the [Enable Operation Log Function] check box on the operation log screen, and then select the [Include in Operation Log] check box on the setting screen for the applicable part.
Applicable parts
|
Bit Switch |
|
|
Word Switch |
|
|
Change Screen Switch |
|
|
Special Switch - Alarm History Switch |
Acknowledge |
|
Clear | |
|
Special Switch - File Item Switch |
Transfer SRAM - Device/PLC |
|
SRAM-Transfer to Internal Address | |
|
Transfer Device/PLC - SRAM | |
|
Device/PLC-Transfer to Internal Address | |
|
Internal Address-Transfer to SRAM | |
|
Internal Address-Transfer to Device/PLC | |
|
Special Switch - Data Transfer Switch |
Transfer CF/USB - Device/PLC |
|
Transfer Device/PLC - CF/USB | |
|
Special Switch - Start Monitor Switch |
|
|
Special Switch - Start Application |
|
|
Special Switch - Exit WinGP |
|
|
Special Switch - Reset |
|
|
Special Switch - Offline |
|
|
Special Switch - Operation Lock Special Switch - Security Special Switch - Selector List Switch Special Switch - Ladder Transfer |
Confirmed |
|
Selector Switch |
|
|
Data Display |
Numeric Value |
|
Text | |
|
Sampled Data |
|
|
Special Data Display |
Show CSV *2 |