GP-Pro EX
Screen development software.
When GP-Pro EX is installed, the Transfer Tool and Version Reverter are automatically installed.
1.3 Operating Environment
Transfer Tool
Tool for downloading projects to the display unit. By installing the Transfer Tool, you can transfer projects to the display unit even if GP-Pro EX is not installed.
34.11.1 Operating Systems that support Transfer Tool
Pass-Through
Feature that enables communication between ladder software and the connected PLC/device via the display unit.
For installation, setting up, or other information about the pass-through function, please see the "GP-Pro EX Device/PLC Connection Manual", section titled "Pass-Through Function Guide".
WinGP
WinGP is an application that runs GP-Pro EX projects on Industrial Panel Computers (IPC Series) or PC/AT-compatible machines, and communicates with connected devices/PLCs. Install when using the IPC series or PC/AT compatible machine as a display unit.
38. Using IPC Series Like a GP (WinGP)
GP-Viewer EX
Use GP-Viewer EX to display and operate remotely located display screens from your computer. Install to run remote operations on display units on the network.
37.1.2 Operation Environment - GP-Viewer EX
Device Data Copy Tool
Use this tool to upload or download the sequencer program or device register data between the display unit and device/PLC. For installation, setting up, or other information about the Device Data Copy Tool, please see the "Device Data Copy Tool Guide" in the "GP-Pro EX Device/PLC Connection Manual".
GP Remote Printer Server
Install when you want to use a network computer as a printer server.
35.3.2.3 Operating Environment for the GP Remote Printer Server
EZ Tower Light Driver
Install when using EZ Tower Light with IPC Series, PC/AT compatible machines, or SP5000 Series Open Box.
To use an Android or iOS device as a client, you need to install Pro-face Remote HMI.
For details, refer to our website
http://www.pro-face.com/trans/en/manual/1001.html