As simulation does not communicate with the device/PLC, simulation will not retrieve communication-related information.
As a result, the communication scan time is displayed as 0. Plus, the simulation processing speed is different from the actual display unit.
Simulation of the following devices is not possible.
File Register (0R...31R)
When using the devices below, simulation of multiple CPU systems is not possible.
Link Input
Link Output
Link Relay
Link Special Relay
Link Register
Link Special Register
CPU Buffer Memory Access Device
CPU Buffer Memory (periodic communication area)
Multiple CPU between common devices (conforms to supporting the device/PLC manufacturer's simulation software).
When using step relays, you can run simulation with the following device/PLC only.
Mitsubishi Electric Corporation MELSEC A Series
Mitsubishi Electric Corporation MELSEC FX Series
Mitsubishi Electric Corporation MELSEC Q Series
For the Mitsubishi iQ-R/F Ethernet (SLMP Client) driver, when [Use Label] is enabled in the [Individual Device Settings], simulation is not possible.