1. Install GP-Pro EX
See the installation DVD-ROM's Readme.txt.
2. Start the software and create a new project
Set up the display unit model and device/PLC.
3.2 Creating a Project - Start / Create Screen / Save / Exit
3. Confirm the device/PLC communication settings
Confirm and set up the device/PLC communication environment.
See the "GP-Pro EX Device/PLC Connection Manual" and the following.
4. Create the screen interface
3.2 Creating a Project - Start / Create Screen / Save / Exit
5. Save the project
Upon saving, checks the project for errors.
3.2 Creating a Project - Start / Create Screen / Save / Exit
6. Test Projects
Make sure there are no problems on your computer before you transfer.
33.1 Settings Menu
7. Transfer project to the display unit
Power up the display unit and transfer the screens.
34.1 Settings Menu
8. Connect the display unit and device/PLC
See "GP-Pro EX Device Connection Manual".
9. Run