-
For details about the setting screen, refer to the setting guide.
M.17.5.3 Initialize Setting Guide - Initialize Backup SRAM
Clears all the data stored in the display unit's backup memory (SRAM).
For details about the setting screen, refer to the setting guide.
M.17.5.3 Initialize Setting Guide - Initialize Backup SRAM
You cannot cancel the Initialization procedure after pressing the [Start] key. Do not turn OFF the power switch while initialization is in progress.
When using the GP-4100 series (excluding GP-411*T3), virtual backup memory data is deleted.
Backup SRAM Initialization will not erase the SYSTEM SET UP, the communication protocol, internal clock settings, or logic program data.
Enter offline mode and touch [Initialization Menu] in the item change over buttons.
From the [Initialization Menu] screen, touch [Initialize Backup SRAM].
From the [Initialize Backup SRAM] screen, touch the input field and use the keypad to type "1101" (when the [System Password] is [Disable]) or type the defined system password.
Touch [Start].
[Is that really alright] confirmation message appears. Touch ,[Yes].
When a message appears indicating initialization is complete, touch [Close].