Output (CH1 to CH4)
Configures settings for module analog output terminals.
Data Format
Select the data format for analog output from the following.
[Voltage (0 - 10V)]
[Voltage (-10 - +10V)]
[Current (0 - 20mA)]
[Current (4 - 20mA)]
Fixed
The analog values in the voltage and current output settings are displayed in the range of the data type. The value on the display unit is the output value multiplied by 1000.
User Defined (Maximum/Minimum)
The analog values in the voltage and current output settings appear within the range of [Maximum] and [Minimum] settings.
The available values are as follows.
Maximum: minimum to 32767
Minimum: -32768 to maximum
Retain Output
Select whether or not you want to retain output values when the logic is stopped. Select [Enable] to retain output values even if the logic stops.