Package Registration Restrictions
Packages are registered and saved when you close the GP-Pro EX project.
You can register up to 200 objects in a single package. To register more than 200 objects, create a new package and register them in a new category.
Parts Registration Restrictions
If you are using GP-Pro EX V2.50 or later, original parts created in V2.50 or earlier are read only and cannot be edited.
If you specify multiple states to the registered images, ensure that the color is not set to transparent. Otherwise, the images are not displayed properly during a state change.
You can register image parts with a maximum size of 160 x 160 pixels.
Parts that use registered images can cause large project file sizes. In the [Color] settings, select the [Compress] check box to manage the project size.
You can register up to 200 image parts in a single parts palette file.
Image parts that have been enlarged or reduced may display differently between the display unit and GP-Pro-EX.
When the registered image size is different depending on the state, the larger image will remain the same, and the smaller image will be enlarged.
You cannot register or delete a previously-prepared PDX file.
The types of image files you can register to a part are BMP, JPEG, DPD, and PNG.