Thank you for the purchase of your WinGP SDK 1.0.

This program is for updating WinGP SDK to Ver1.00.200.
The setup procedure of the program is as follows. 

- Setup Procedure
This program should be run on a PC in which WinGP SDK 1.0 has been installed.

Do not uninstall WinGP SDK because this installer 
overwrites only the parts to be updated.

Be sure to close programs of WinGP SDK before starting 
installation.

1. Execute the provided program on the PC in which WinGP SDK 1.0
   has been installed.

2. Once the installer is activated, follow the directions displayed on the screen.
   If there are any problems and installation cannot be completed, please contact
   our company.

- Added Function in V1.00.100
1. The following protocol is supported.
	Maker:		Rockwell Automation
	Device Type:	EtherNet/IP
	SeriesF	ControlLogix/CompactLogix Series Native

2. The following PS Series is supported.
	- PS3710A-T41
	- PS3711A-T41

- Problems resolved in V1.00.200
1.	The error occured when the device name including more than five "."s
	was specified.

- Added Function in V1.00.200
1.	System variables newly added in GP-Pro EX V2.10 are supported.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you have any questions regarding your PC or Windows, contact your local agent 
or manufacturer of the PC.


Digital Electronics Corporation
8-2-52 Nanko Higashi, Suminoe-ku, Osaka 559-0031, Japan
Phone +81-6-6613-1101  Fax +81-6-6613-5888
http://www.pro-face.com/

                                       (c) 2007 Digital Electronics Corporation