 |
| Software Update Module / Add-on Software |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
GP-Web consists of two programs, GP-Web
Screen Compiler and GP-Web Server, and this update module is for GP-Web
Server.
Therefore, run this update program only on the PC where GP-Web Server has been
installed. |
| |
NOTE:
To use the Ver. 1.13 functions, the
following files shoud, also, be updated. |
- GP-Web Screen Compiler V1.12
- Pro-Server with Pro-Studio V3.12
- 2Way Driver V3.02 |
| |
| File
Name |
GP-WebServer011300.exe |
| Size |
1,399KB |
| Update
Version |
Version 1.13 |
| Original
Version |
GP-Web
Server Ver. 1.0, Ver. 1.01, Ver.
1.02, Ver. 1.11, Ver. 1.12 |
| Update
Description |
| 1. |
The following issues were
resolved.
When an S-tag trigger bit's setting is 0-->1, even if the text string data is
renewed the new text string data is not displayed on the screen.
When an L-tag screen and another screen overlap and every time the L-tag's trigger
bit state changes (regardless of 0-->1 and 1-->0), the L-tag screen will move
to front-most on the screen.
When an L-tag's image screen extends beyond the GP's screen border(s), and the
image screen erase operation is performed, the position of the black screen used
to erase the image may be incorrect.
When the import of a portion of a large number of images fails, it will appear
as if GP-Web has frozen.
When the L-tag's "Designated Screen" is set to "State", the
screen displayed by GP-Web is sometimes different from the original GP screen. |
|
|
|
| Opening the file: (This is a self-extracting
file.) |
Since this is an update program, you do
not need to uninstall the GP-Web Server
program.
Also, be sure to close the GP-Web Traffic Center before starting this program.
Since the GP-Web Java display elements are cached (saved) by Microsoft's Internet
Explorer, be sure to delete the cache file. |
| |
Cache
File Deletion Steps |
| |
| 1. |
Click on the above file name to download the data
to a folder you wish to store. |
| 2. |
After the download is finished, double-click on the
file to open it. |
| 3. |
Follow the Installer's instructions to install the
update files. |
| 4. |
After installing this module, restart your PC. |
Attention:
While viewing the property of the downloaded update module, and selecting the "Version
Tab", the follwing error will be displayed:
"This program has performed an illegal operation and will be shut down."
We have confirmed this problem. Please do not view the "Version Tab" of
this updated module.
This problem will not effect the updated module which will correctly install
the updated files to your computer. |
|
Update History:
[Ver. 1.12 Update Contents]
The following issues were resolved. |
| - |
Certain Switch parts cannot
change their display color. |
| - |
When a U-tag is used to display
standard read settings, switches located in
hidden areas of the window will be disabled. |
| - |
When a T-tag is used to perform
a Reset, the applet will freeze. |
| - |
When a relative address is designated
via an F-tag, a Display Window Number error
will occur. |
| - |
When an E or K-tag are used
in 256 color mode to create an indirect designation,
the background color's transparent color is
not enabled. |
| - |
When a K-tag is used to perform
BCD input, even when the value used exceeds
the entry range, an error will not occur. |
| - |
When a K-tag or E-tag are used
with the Float display and the Alarm Range
(direct) settings selected, the alarm feature
will not operate correctly when the following
range of setting values is used. +/-xE+/-y(x,y:integer) |
| - |
When the K-tag is set for BCD
input and the alarm range is indirect, if the
desired number of decimal places is 3 or more,
and the connected device is used to designate
the maximum number of decimals, the input function
stops. |
| - |
Even though 2-byte characters
are used, the actual text string display is
in single-byte characters. |
| - |
Text string characters set to "Raised" and
blinking will display the same as the regular
display colors. |
| - |
When an L-tag is set to "Indirect" and
the start method is 0 -> 1, or 1 -> 0,
if multiple tags are copied and pasted, the
initial display may fail. |
| - |
When "Tiling Pattern" is
selected for a C-tag, even though the background
color is set to "transparent", it
will not become transparent. |
| - |
When a rectangle is filled,
if the corners are chamfered with straight
lines, the rectangle may not display correctly. |
| - |
If an E-tag or K-tag have been
designated as using floating decimal point/relative
colors, the actual value display may disappear. |
| - |
When a K-tag is set for "BCD
Input - with Calculation", numeric input
cannot be performed. |
| - |
When a G-tag bar graph is used,
the display may be incorrect. |
|
[Ver. 1.11 Update Contents] Last
updated May 28, 2001
The following issues were resolved. |
| - |
GP-Web now supports the E/K/F
and C tags. This brings the total number of
tags supported by GP-Web to 10 (N/G/S/T/U/L/E/K/F/C). |
| - |
These newly-added tags provide
support for a number of Parts, including Tanks,
Meters, Numeric Displays, Date Displays and
Time Displays. |
| - |
Multilingual compatibility is
now available. |
| - |
An error may occur, or no data
may not be displayed, when alarm data is read
from a CF card on GP unit. |
|
[Ver. 1.02 Update Contents] Last
updated April 18, 2001
The following issues were resolved. |
| - |
An error message on the GP-Web
Traffic Center program, when two-byte (Chinese,
Korean, etc.) characters is used as a the Pro-Server
node name, is fixed. (GP screen data will not
appear on browser.)
" 19014 data syntax error "
|
| - |
Items displayed via the GP-Web
Java display applets (Library items, G-tag
alarms, and N-tag relative data.) will now
appear correctly. |
|
[V1.01 Update Contents] Last
updated Jan 15, 2001
The following issues were resolved.
When the user attempts to start up the "Traffic Center" program on
a PC where "Pro-Server with Pro-Studio Ver. 3.0" has not been installed,
the program cannot be started, or the "ProEasy.dll LoadError" will
appear in some cases. |
| Last Updated : August.3, 2001 |
|
