*************************** GP-Viewer EX V1.11.100 *************************** September 2008 Digital Electronics Corp. Contents ================================================================================ [Limitations] 1. Portrait display is not supported. (Do not rotate the display unit.) 2. When using double-byte characters for screen titles, it may not display correctly in the Change Panel switch dialog. 3. In Data Display/Text Display, "Device" or "Device Type/Address" is specified in the Address Type, the display may be different from the server right after the connection is established. 4. If Global Window is set to "Indirect" and the data format is set to "BCD", the following restrictions apply. When Screen Mode is Asynchronous, moving the Global Window using Add or Subtract buttons to change X or Y coordinates did not operate properly. 5. When a JPG file name in CF card or USB stick storage has any null characters, the JPG file is not loaded. Replace the null characters with other characters. 6. In "Operation Lock": - When "Timeout" is short or there is a slave/GP-Viewer EX whose response is slow to a master's operation lock notification, the system variable "#H_IsLockOwner" of the display unit that has locked other display units remains ON. 7. Special Relay Area (LS2071-LS2074, LS2078-LS2095) cannot be written from the Viewer. 8. You cannot open or save the settings file which is already open. 9. When using a long path for the settings file storage location, the GP may fail in acquiring data from external storage due to operating system path length restrictions. Use short paths for the Settings file. 10. When "Write GP-Viewer Data" is set to "Disable", Viewer cannot lock the operation of Display Unit. 11. When GP-Viewer EX connects or re-connects to Display Unit, GP-Viewer EX sometimes displays different Alarms from those displayed on Display Unit. In this case, select "Screen Update" from the menu of GP-Viewer EX. ================================================================================ Warning: No part of this document may be used or reproduced without permission. ******************************End of Release Note*******************************