 |
| Software Update Module / Add-on Software |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
| These service pack modules are NOT designed for the GP-PRO European edition. Please see the following chart and confirm that your GP-PRO is NOT the European edition before installing the modules on this page. |
 |
To check your GP-PRO version:
Navigate through the following GP-PRO menus to confirm your GP-PRO version: [Project Manager] -> [Help] -> [About...] |
|
|
|
| *1 |
If your GP-PRO version is marked *1 and you don't know your GP-Pro is the European produst or not,please send us an e-mail, "support@proface.co.jp" and inform us of your serial number. Our support staff will contact you. |
| *2 |
If your Pro-Control version is Ver. 5.01, please check your GP-PRO version. |
|
NOTE:
To use the GLC Control System Ver.4.3 functions, the following file shoud, also, be updated.
- GP-PRO/PB III C-Package02 Service Pack 2
Confirm your software version using the following steps:
[OFFLINE] --> [INITIALIZE] --> [PLC SETUP] --> [CTRL SETTING] --> [CONTROLLER DIAGNOSIS] --> [CONTROLLER INFORMATION]
Version information will be shown in the [CTRL] area.
|
| File Name |
GLC_Ver433.exe |
| Size |
1,444KB |
| Update Version |
GLC Control System(GLC2400T/GLC2600T) Version 4.33 |
| Original Version |
GLC Control System Version 4.3 |
| Update Items |
| The following issues were resolved. |
|
- |
The GlC ladder monitor window will be hung up when clicking the GLC Ladder Monitor Switch button(END button) or the Rung Number Display button during the message showing the search is in progress on the GLC ladder monitor. |
| - |
Unable to display the true variable name and value when using the timer/counter variable in a parentheses speicified with array or X/B/W on the GLC ladder. |
*For information about GLC Control System Ver.4.3 Update File, see readmee.txt |
Supplement:
*1 Your PC and any data on the hard disk are not affected by the above error. |
|
|
|
|
|
When setting up your GLC again:
After the update file is installed, use the following steps to setup your GLC unit again. |
| 1. |
Select the "Transfer Setting" check box in the "Control Data" tab, and set "Automatically Send Changed Screens" in the "Transfer Method" tab. |
| 2. |
Send the project to the GLC. |
Opening the file: (This is a self-opening file.) |
| 1. |
Click on the above File Name to download data to the folder you wish to use. |
| 2. |
After the download is finished, double-click on the file to open it. |
| 3. |
Follow the Installer's instructions to install the update file. |
|
| Last Updated : Nov.18,2003 |
|
