************************************************************
GP-PRO/PBIII C-Package02
< Pro-Control Editor V4.30 >
GLC Controller System Program Update Module
************************************************************
2003/11/7
Digital Electronics Corporation of Japan

Preface

Thank you for downloading the GLC controller system program 
update module from the Pro-face home page.
Simply click on the file icon and the installer program will 
automatically copy these new GLC controller system program to
your GP-PRO/PB3 for Windows "PROTOCOL" folder. You can then 
easily update your GLC's controller system program when you 
download data from your PC to the GLC.

The following list indicates the new controller system 
program version.

  GLC2400/GLC2600                Ver. 4.33


============================================================
Table of Contents
============================================================
1. Program Modifications
  1-1. GLC2400/GLC2600�iV4.33�j

2. Module Installation Procedure
  2-1. Prior To Installation
  2-2. Installation Procedure
  2-3. Downloading data to the GLC

============================================================
1.  Program Modifications
============================================================
1-1.GLC2400/GLC2600�iV4.33�j

  (1)The GlC ladder monitor window will be locked when 
  clicking the GLC Ladder Monitor Switch button(END button) 
  or the Rung Number Display button during the message 
  showing the search is in progress on the GLC ladder monitor.

  (2)Unable to display the true variable name and value when
  using the timer/counter variable in a parentheses 
  speicified with array or X/B/W on the GLC ladder.

============================================================
2. Module Installation Procedure
============================================================
2-1.Prior To Installation
- Be sure to close all application programs.

---------------------------------
2-2. Installation Procedure
- After the download to your PC finishes, double-click on the 
  file's icon to start the installer program. After the 
  installer starts, simply follow the instructions given on 
  each screen. This program installs the new GLC controller
  system programs into the GP-PRO/PB3 for Windows "PROTOCOL" 
  folder.

---------------------------------
2-3. Downloading Controller System Program data to the GLC
- To send new GLC controller system program data to the GLC:
  Use the GP-PRO/PBIII "Transfer" area's "Automatic Setup" or 
  "Force Setup" feature to download the new controller system
  program data to your GLC. 
 
---------------------------------

Note: This document may not be reproduced, either in whole 
or in part.
(C)2003 Digital Electronics Corporation
************************  README.TXT  **********************