Products
Download
Contact us
Back to Top
 PS Series
 > PS Series Type-G > Parallel Port Driver Update

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download
File Name ccparallel_104.CAB
File Size 6KB
Unit Name PS Series Type-G
Description New CCPARALLEL.DLL Parallel port Driver for PS Series Type-G units.
Update Description
1. This module corrects the following:
- Although an application is created in order to print out through the parallel port of a printer that does not support a printer driver, some printers are still unable to print.

Note:
This driver is not a printer driver.
To print out with a printer which does not support the Windows®CE standard printer driver, it is necessery to create an application in order to print out through the parallel port of the printer.

Installation (This file is self-extracting.)
1. Download the above file "ccparallel_104.cab" to the desired folder.
2. Copy "ccparallel_104.cab" to a CF Card, and insert the CF Card into your PS Series Type G unit.
3. Start up Windows Explorer, copy "ccparallel_104.cab" from the CF Card's [Storage Card1] folder and paste it to the PS unit's [Temp] folder.)
4. Double-click "ccparallel_104.cab".
5. In the "Installing Pro-face CCPARALLEL.DLL Ver. 1.04" dialog box, confirm that the path "\Windows\" is selected as the installation destination folder and click "OK".
6. When "Confirm File Replace" dialog box appears, click "Yes".
7. Select "Backup" in the Control panel, and save the PS unit's current environment settings to the CF card.
8. Restart the PS-G unit.

Last Updated: May.7.2004
| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.