Products
Download
Contact us
Back to Top

PS Series

PS Series Type-A > PS-345xA Series > System Monitor for PS-345xA Series and Windows® XP/XP Embedded CF card 2GB version

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

  • Install this system monitor in the case of the following.
  • When customers who have used the type without a preinstalled OS want to install the OS as shown in the table below
  • When customers who have used the one shown in "Applicable Version" below want to update the version
  • It is unnecessary to install this system monitor when customers have used the type with a preinstalled OS other than the one shown in "type with a preinstalled OS" below.
  • After installing this system monitor once, it is not possible to uninstall.
  • Windows® XP Embedded users need to set the write filter to “Protect OFF” by using EWFSettingTool and then restart the system before the installation.
  • When this System Monitor is installed, all settings in System Monitor Property are returned to the default settings.
    When you have changed the default settings, make the settings once again after the version upgrade.
Title System Monitor for PS-345xA Series and Windows® XP/XP Embedded CF card 2GB version
File Name PS345XA_PS300XB_SystemMonitor_117.exe
File Size 3,262KB
Version 1.17
Supported OS
  • Windows® XP
  • Windows® XP Embedded
* CF card 2GB version only for Windows® XP Embedded
Description This is a System Monitor for PS-345xA Series.
After installing this program, you can use the state monitor function of the hardware.
Updated Contents Ver. 1.17 (Oct. 26, 2010)
The following issue has been changed.
  • S.M.A.R.T. error message -> S.M.A.R.T. warning message
Applicable Version When customers use the following product, update is required.
-> How to confirm your Software Revision
HDD Type with a preinstalled OS
Model Software Revision Volume Label
PS345XA-HD40-WXP-BLD [-] to [A] PS345XAXPJ1 to
PS345XAXPJ2
PS345XA-HD40-WXP/ML-BLD [-] to [A] PS345XAXPM1 to
PS345XAXPM2
XP Embedded
Model Software Revision Volume Label
PS345XA-XPE2G-BLD [-] 345XAXPE2M1

When customers use the following product, installation is required.

Type without the preinstalled OS
Model
PS345XA-HD40
PS345XA-HD40-BLD
-> How to confirm your Software Revision

Installation (This file is self-extracting.)

  1. Click "PS345XA_PS300XB_SystemMonitor_117.exe" and download it to the appropriate folder.
  2. Double-click the downloaded file. (Any extraction destination will do.)
  3. When [OK] is clicked, the file is extracted. (If the same name file has already existed, it is overwritten.)
  4. Double-click the "PS345XA_PS300XB_SystemMonitor_117.exe" file that is extracted in Step 2 above to start the install.
  5. Complete the install by following the messages on the window.
  6. Restart the panel computer.
  7. After the restart, click OK if the following message is displayed: "The constitution was changed. Start configuration." The restart process will be executed again automatically.

Update History:

[Ver. 1.17] (Oct 26, 2010)

The following issue has been changed.
  • S.M.A.R.T. error message -> S.M.A.R.T. warning message

[Ver. 1.15] (July 24, 2009)

The following issue has been corrected.
  • The backlight burnout error may be mistakenly detected in some cases.
The following functions have been added.
  • The validated device identification function has been added.
  • The threshold for CPU voltage monitoring is settable according to each CPU's specifications.

[Ver. 1.13] (Mar. 6, 2008)

The following specification has been fixed.
  • The task tray icons might not be changed successfully.
The following specification has been changed.
  • The [Close] button in System Monitor GUI has been deleted.

Last Updated : Oct 26, 2010
Posted : Mar. 6, 2008

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.