Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
To install this software, an ADI driver must be installed in advance.
Install this software in the following cases:
When customers who have used the type without a preinstalled OS want to install the OS as shown in the table below.
When customers who have used the one shown in "Applicable Version" below want to update the version.
It is unnecessary to install this software when customers have used the type with a preinstalled OS other than the one shown in "type with a preinstalled OS" below.
To install this file in Windows(R) Embedded Standard 2009 or Windows(R) Embedded Standard 7, the Enhanced Write Filter (EWF) must be set to "Disable." After having set it to "Disable" using "ChangeEWFState.exe" installed in the product, restart your system and install the file in accordance with the procedure.