 |
| PL
Series |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
--Caution---
| - |
To use this update, the previous version of the system monitor must be installed. |
| - |
This file is only for PL-X920 Series. Please do not use it for other models. |
| - |
If the System Monitor has already been registered in the start-up menu, the error message of a double start is displayed at OS start. In that case, please delete System Monitor registered in the start-up menu. |
|
| File
Name |
PLX920_SysmonUpdate20051206.exe |
| File
Size |
1,958KB |
| Unit
Name |
PL-X920 Series |
| OS |
Windows®95
( OSR2 or later ) , Windows®98SE,WindowsNT®)4.0
( Service Pack6 or later ) , Windows®2000,
Windows®XP |
| Description |
Contains the RAS/System
Monitor update. |
| Update
Description |
| 1. |
The
following issues were corrected |
| |
| - |
Increases in memory usage of the System Monitor increases. |
| - |
The Power Option in the control panel could not be set when using the System Monitor for a long time with SoftMirror. |
| - |
The processing of System Monitor stopped while displaying a message of remote RAS communication error. |
| - |
When there were two or more network devices, it becomes Auto even if the first device was selected by setting of remote RAS. |
| - |
When starting System Monitor Propenty again, error action of WDT could be set even if Reset was enabled. |
|
| 2. |
Restrictions: |
| |
| - |
Administrator
authority is required
for executing SMART
Monitoring. |
| - |
Only
hard disks connected
with IDE can be monitored
by SMART.
The state of a hard disk connected with USB or SCSI cannot be monitored. |
| - |
CF
cards do not support
SMART and therefore
the status of CF
cards cannot be monitored. |
| - |
When
PL-SM900 (softmirror
utility) Rev.C or
earlier is used,
SMART cannot be monitored. |
| |
In
this case, please
download and install
the PL-SM900 update
module. |
| - |
Windows®95
and Windows®98
don't support
SMART Monitoring
function. |
| - |
When
Digital's optional
hard disk or the
revisions shown in
the table below are
not used, operation
of SMART Monitoring
cannot be guaranteed. |
| |
SMART
Monitoring Supported
HDD
| Model
type |
Revision |
| PL-HD220 |
Rev.C
or later |
| PL-HDX920-W2K/ML |
Hardware
Rev.A or
later
( Rev. (H)
A ) |
|
|
| 3. |
This update
will make the version of
PL_SMON.EXE 4.01 --> 4.02. |
| |
If
the version is PL_SMON.EXE
4.02 or higher, it is
not necessary to execute
this update.
The file exists in C:\Proface\Sysmon folder.
Version information can be checked by referring to the version in file properties. |
|
|
|
About RAS/System Monitor
For details, please read the following PDF:Manual PDF (3,320KB) |
|
Installation (This file is self-extracting.) |
| 1. |
Download "PLX920_SysmonUpdate20051206.exe"
Click on "PLX920_SysmonUpdate20051206.exe" and download the data to the desired folder on your PC. |
| |
| * |
If the update module cannot be downloaded to the PL-X920 unit, please download temporarily to the another PC, and copy the module to the PL-X920 unit where you want to install the module. |
|
| 2. |
Exit System Monitor if it is running. |
| 3. |
Double-click the downloaded file "PLX920_SysmonUpdate20051206.exe". |
| 4. |
Update starts automatically. |
| 5. |
Reboot the system after installation. |
|
Update History |
| [January 26.2006] |
| 1. |
The following
issues were corrected: |
| |
| - |
Increases in memory usage of the System Monitor increases. |
| - |
The Power Option in the control panel could not be set when using the System Monitor for a long time with SoftMirror. |
| - |
The processing of System Monitor stopped while displaying a message of remote RAS communication error. |
| - |
When there were two or more network devices, it becomes Auto even if the first device was selected by setting of remote RAS. |
| - |
When starting System Monitor Propenty again, error action of WDT could be set even if Reset was enabled. |
|
| 2. |
With this
update, applications with the following
versions are provided. |
| |
| - |
PL_SMON.EXE
Version 4.01 --> 4.02 |
|
|
| [October
20.2005] |
| 1. |
The following
issues were corrected: |
| |
| - |
When
System Monitor started in Windows(R)XP,
the icon is not registered in the
task tray. |
|
| 2. |
The following
settings were added: |
| |
| - |
Support Remote
RAS function, and integrated
functions in Remote RAS System
Monitor which was available in
another version (Version 4.00). |
| - |
An error pop up
message displayed again. |
| - |
The text of the
error pop up message was changed
to red. |
| - |
The SMART monitoring
function of HDD support following
revisions of products. |
| |
| Model |
Revision |
| PL-HD220 |
Rev.E |
| PL-HD220-BLD |
Rev.A |
| PL-HDX920-NT40 |
Hard Rev.C
( Rev. (H) C ) |
| PL-HDX920-W2K |
Hard Rev.C
( Rev. (H) C ) |
| PL-HDX920-W2K/ML |
Hard Rev.C
( Rev. (H) C ) |
| PL-HDX920-WXP
(SP2) |
Hard Rev.C
( Rev. (H) C ) |
|
|
| 3. |
With this
update, applications with the following
versions are provided. |
| |
| - |
PL_SMON.EXE
Version 3.04 --> 4.01 |
| - |
RRemote
RAS System Monitor PL_SMON.EXE
4.00 --> 4.01 |
|
|
| [March.31.2005] |
| 1. |
The following
settings were added: |
| |
| - |
Hard
Disk is monitored by Hard Disk
SMART function. |
| - |
System
Monitor is set to start automatically
when OS starts. |
|
| 2. |
With
this update, applications with the
following version are provided. |
| |
| - |
PL_SMON.EXE
Version 3.02 --> 3.04 |
|
|
| [March.9.2004] |
| 1. |
The following
issues were corrected: |
| |
| - |
The
Reset button does not become
effective when the data backup
is not completed. |
| - |
The
task tray icon is displayed
as "Administrator" in
Soft Mirror use. |
| - |
Status
change of Soft Mirror is not
reflected. |
| - |
It
may not be able to start if
it registered to "start" menu. |
| - |
A
check message is not displayed
even if it cancels setting
change of the System Monitor
property. |
| - |
It
will become a blue screen when
shut down WindowsNT®. |
|
| 2. |
With
this update, applications with the
following version are provided. |
| |
| - |
System
Monitor --> PL_SMON.EXE
3.01 --> 3.02 |
| - |
System
Monitor Property --> PL_WPS.EXE
3.02 --> 3.03 |
|
|
|
| Last Updated: January
26, 2006 |
|
