Contact us
Back to Top

Panel Computer Issues

>Remote RAS Setting File

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
File Name RemoteRASConf_01142006.exe
File Size 39KB
Model OS pre-installed HDD and XP Embedded types of the following series:
  • PL3000 series
  • PL-5910 series
  • PL-X920 series
  • PL-X930 series
  • PS-2000B series
  • PS-345XA series
  • PS-365XA series
  • PS-370XA series
  • PS-371XA series
Version 4.0
Description This setting file enables to monitor the status of the PL/PS series using Pro-Server with Pro-Studio and Pro-Server EX.
Important Note System Monitor needs to be started on the available model. In addition, Remote RAS of System Monitor must be Enable.(Enable/Disable setting of Remote RAS can be made from System Monitor Property.)
Setting Procedure

Pro-Server with Pro-Studio: Click here.

Pro-Server EX: Click here.


The link above shows the device setting and monitoring procedure. For other functions of Pro-Server with Pro-Studio or Pro-Server EX, refer to "Pro-Server with Pro-Studio Operation Manual" or " Pro-Server EX Reference Manual." Regarding the restrictions for monitoring, refer to the pages related to Remote RAS settings of the user's manual or reference manual in the applicable model.

Manuals: Click here.

Installation (This file is self-extracting.)

  1. Click on the link "RemoteRASConf_01142006.exe" in the table above to download the file to the desired folder.
  2. Double-click on the downloaded file "RemoteRASConf_01142006.exe"to decompress it.
  3. Copy the "PL_RAS.TBL" file, which is in the folder after decompression, to the PLCTBL folder of Pro-Server with Pro-Studio or Pro-Server EX.

Last Updated : Aug. 10, 2007

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.