 |
| PL
Series |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
| File
Name |
keyclke.EXE (English
Version) |
| File
Size |
74KB
(English Version) |
| Supported Models |
|
| Description |
A
keyboard emulator to be run on a
PL unit for touch operation.The files
attached is a new version of 2.3. |
| Update
Description |
|
The
following issues were resolved. |
|
| - |
This
update fixes the problem
that occured when active
windows on a PL unit are
repeatedly changed while
Keyclick is displayed (active).
This had caused the CPU usage
(load) time for Keyclick
operation to increase, which,
in turn, had caused the PL
unit's system response speed
to become extremely slow. |
|
|
|
| Installation (This file is self-extracting.) |
| 1. |
Double-click "keyclke.EXE".
This will download the program to a folder
on your PC. |
| 2. |
After the download
is finished, double-click on the file to
open it. |
3.
|
Confirm that the destination
of the downloaded file is "C:\Proface\Keyclick". |
| 4. |
The existing "Keyclick" files
will be automatically overwritten. |
|
Caution
This Keyclick update module will not start if an older version of "Keyclick.ini" is
not already installed in "C:\Proface\Keyclick".
An older version of "Keyclick.ini" can be installed from the "Driver & Utility
Disk" supplied with your PL Series unit. |
| Last Updated: December.21.2001 |
|
